Galcon GalStar, Инструкция

Страница: 31 / 107

31
GalStar Instruction 1.0
4. Advanced Operation
This chapter explains all of the functions and screens of the controller. The chapter is set out
according to the order of the screens and not necessarily by their importance or frequency of use.
Please note: The number that appears in brackets next to the heading of each paragraph is the
screen number for direct access. In addition next to certain screens the title “Element Screens”
appear. “Element Screens” are screens that apply to many elements of the same type, for example:
“Program Programming” and “Valve Setup”. Pressing on “Prev” and “Next” navigates between the
different numbers of the same “element” type (for example: navigates between “Irrigation Program”
No. 1 to “Irrigation Program" No. 2).
Head 1 Status (1):
This screen displays the head status along with information about the program/
sequence operation.
Screen Explanation:
• Current Status:
The first row shows the head status, the options are: N.Active, Valves – all
definitions have been made but there is no start time, Ready, Pause – the head is manually paused -
when resumed it will continue from the same point , Irrigat., Fertig. (irri fertilizing) , Alarm.
•
The rest of the screen shows a table in which the statuses of the program/sequences are displayed.
The columns are:
o
Number of Sequence:
When zero the program is working without a sequence.
o
Number of Program
o
Number of Valve:
Shows the number of the first valve in the program (out of 5).
o
Program Irrigation Status:
See “Basic Operation”.