Galcon GalStar, Инструкция

Страница: 59 / 107

59
GalStar Instruction 1.0
4. Advanced Operation
Fertilizers Status (315):
Press “Fert. Pumps” in the “Head 1 Status – 31” screen to access:
Screen Explanation:
This screen shows the status of all the three fertilizer pumps of the “Head”.
In addition this screen shows the status of up to 32 irrigation sequence programs status.
Head 2 Status (32):
All of the above explanations in chapter 3 apply to Head No.1, the same
applies to “Head 2” with the difference being that the screen number starts with 3.2 instead of 3.1.
Other Element Status:
In a similar fashion to the last screens it is possible to see other elements
status as follows:
Auxiliary Status (33):
Press “Aux.Output” in the “System Status – 3” screen to access the “Auxiliary
Status - 33” screen in which you can see the status (On/Off) of 4 auxiliary outputs.
Control Sensor Values (34):
Press “Cntrl Sensor” in the “System Status – 3” screen to access
the “Control Sensor Values – 34” screen in which you can see up to 50 sensor values (they only
appear when defined).
Conditioned Inputs (35):
Press “Cond. Inputs” in the “System Status – 3” screen to access the
“Conditioned Input Status - 35”” screen in which the status (On/Off) of up to 8 “Conditioned Inputs”
are shown.
General Counter Status (36):
Press “Gnrl.Cntrs” in the “System Status – 3” screen to access
the “General Counter Status – 36” screen in which the status of up to 4 “General Counters” are
shown. The options are:
Not Def, Connect – connection definition error , PlsSize – pulse size error
definition,
Double
– more than one counter is connected to the same output
, Ready.
Logic Condition Status (37):
Press “Logic.Cond.” in the “System Status – 3” screen to access
the “Logical Cond. Status – 37” screen in which the status of up to 30 “Logical Conditions” are
shown. The options are:
N.Active, Off, On, Tim.Rang, Error, Add.Err
– linked condition error
,
Tim.Def, ElmntDf, Action, Opr.Def. – operated element definition.