Galcon GalStar, Инструкция

Страница: 46 / 107

46
GalStar
Instruction 1.0
• Contin. Operation:
In “Continuous operation”, the duration of operation of the fertilizer pump
between two pulses of water is continuous i.e. the fertilizer pump only works once between two
pulses of water. In “Non-Continuous” the duration of operation of the fertilizer pump is divided into
a few pulses according to the pulse duration set in the fertilizer pump. The normal status is “
Non-
Continuous”.
• Elctrn. Stroke-Ltr:
The volume of a stroke in an electronic pump. The controller calculates the
fertilizer accumulation according to this number.
•
Uncont Fert Pulse:
Uncontrolled fertilizer is when the pump is not working but the fertilizer meter
send pulses. In order to prevent false alarms a number of pulses permitted per day must be entered.
• No Frt.Pulse – Sec:
The maximum time permitted between pulses or at the beginning of irrigation.
This type of failure suggests that the fertilizer tank is empty or that the fertilizer meter is faulty.
•
Flow Calc. Time –Sec:
In order to stabilize the flow rate of the fertilizer pump (which works
intermittently and therefore the calculation is over a very short period of time) the controller calculates
an average over a longer period of time. This period of time should be defined here.
•
Max Frt Increase/Decrease
(2 parameters) : The percentage limit of the EC/pH correction.
•
Out/In Connection & Pulse Volume
– ltr (Gallons) (3 parameters) : Information only. They
are set up in the “Tech Menus”.
Fertilizer Center Constant (143):
Press “F.Cntr Const” in the “Fertilizing Status -14” screen to
access the “Fert Center Const – 143”.
Screen Explanation:
• Operation Setup *:
The options are : N.Activ, Active, Paused.
•
Start Delay – Sec.:
Delay at the start of irrigation during which the fertilization is not carried out.
4. Advanced Operation