Galcon GalStar, Инструкция

Страница: 96 / 107

96
GalStar
Instruction 1.0
Example: The following screen shows the definition of Head 1 Main Valve:
• To move to the next element press “Next”.
• Upon finishing the definitions of one of the 3 sections (outputs, inputs, analogs) press
“Jump” for the next section.
Upon finishing the connection definition a message appears “Please Wait While Saving Changes”
(approximately 30 seconds).
Test Hardware: This section is designed for high level technicians and you should consult the
GalCon support team before use. One useful function is the “Output Test” in this screen you can
choose the slot number and output number and open and close them manually. Please note that if
the slot number is not an output it will not function.
Sensors (42): There are several type of sensors in the Gal-Star controller. They include: control
sensors, sensor groups, non-linear sensors, meteorological sensors, sensors via communication
etc. The method of definition is by defining a direct sensor (which is a basic unit) and assigning
it to the other sensor elements.
Press “Main”>”Gnrl.Elmnts”>”Sensor” to access the “Sensors – 42” screens:
Please Note:
in order to exit the "Connection
Wizard" press "Jump" to reach
the next section (3 times)
6. Gal-Star Software Setup Instructions