Galcon GalStar, Инструкция

Страница: 39 / 107

39
GalStar Instruction 1.0
4. Advanced Operation
Valve Groups (134):
The number of valves that can be assigned to an “Irrigation Program” is limited to five. Sometimes
it is required to operate more than five valves in one “Irrigation Program”. This can be achieved by
using a “Valve Group. The “Valve Group” is a group of valves that can be assigned to the irrigation
program as a valve thus enabling operating many valves by one irrigation program. After defining
the valve group assign it to the irrigation program (in “Program Constants – 123” as the number of
the valve group + 100. For example: Valve No. 103 in the “Irrigation Program” means “Valve Group”
number 3. Up to 10 groups can be defined. Press “Valve Groups” in the “Valves Status – 13” screen
to access the “Valve Groups - 134” screen.
Screen Explanation:
• Group Status:
The options are: Not Def, Ready, Error.
• Curr. Flow M3/Hr (GPM):
Shows the flow rate measured by the water meter assigned to the valves.
• Req Flow M3/Hr (GPM):
The sum of all of the nominal flow rates of all of the valves assigned
to the valve group.
•
All Valves Area:
The total area of the valves in the group.
•
Valve A-J Status:
The options are: Not Def, Ready, Error.
•
Water Meter No.:
Shows the valve number as assigned by “Valve Group Setup” or in the valve
setup. See more in “Group Setup”.