Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 248

6-4
NAME PLATES
Sticker [POINTS TO NOTICE IN HANDLING OUTRIGGERS]
URW505C4U exclude
rated loads.
09VL81040-W376C1UR
Rear
Rear
cylinders after each inner box has been extended.
halfway, or the minimum extension according to the “arrangement of outrigger extension”
each vertical cylinder has fully been retracted.
in the cargo lifted in front and rear and on the right and left.
When outriggers are to be extended or stored, be sure to insert the pins so that
with the outriggers fully extended.
outriggers may not be rotated unexpectedly.
Be sure to store the outriggers before travelling.
When setting up outriggers, be sure to touch them to the ground with vertical
mounted lower side.
Outriggers may become hard to be rotated when the floats touch to the supports
Retract vertical cylinders before the stored outriggers are to be rotated.
Do not extend vertical cylinder and inner box with the outriggers retracted.
and operate the crane each under the halfway or the minimum capacity specified in the
When extending outriggers halfway, align the inner box extended either with the
Set up the outriggers on a flat and solid ground and in principle, operate the crane
When operating the crane, be sure to use outriggers to keep the crane body to be level.
When storing outriggers, be sure to retract the inner boxes to their extremes after
that it will not to be overturned.
Operate the crane with the working radius as short as possible and paying attention
When swinging the boom with a cargo lifted up, stability of the crane is different
Outriggers extended to minimum
Outriggers extended halfway Outriggers extended to maximum
CAUTION OUTRIGGER OPERATION
ARRANGEMENT OF OUTRIGGER EXTENSION
(1st)
(2nd)
Front
Front
Rear
Front
Float
Inner box
Mark
Mark
Inner box
Float
Float
14.6ft
15.0ft
14.3ft
13.6ft
12.5ft
12.5ft
10.3ft
10.5ft
12.1ft