Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 119 / 248

12-13
U-WAVE, Radio remote control device, (Option)
OFF
ON
Voice switch
3.
Depression of the “horn (start) switch” on
the transmitter energizes the transmitter and
“power lamp” lights (in red, in orange, or in
green).
4.
Check that the voice switch has been
turned ON.
If not, turn it ON.
5.
Depress the “radio remote control selector
switch” on the switch panel to turn it to be
operated on radio remote control mode.
The mode indicator lamp indicates [
] and
the following voice message is issued:
“Remote control ready, Remote control
ready”.
• Power to the transmitter is to be turned OFF
by pushing in the “E-stop switch”, or by
turning OFF the “key switch”, or if time has
passed for more than 5 minutes when no
crane operation has been carried out.
• If the “power lamp” blinks or fails to be lit,
replace batteries of transmitter according to
the section 12. “
◆
3.How to replace bat-
teries” illustrated on page 12-37.
Voice message will not be issued when the
voice switch has been turned OFF.
Remarks
When the operation mode is switched to
“radio remote control mode.” with power to
transmitter turned OFF, the mode indicator
lamp indicates [
].
Turning ON the power to the transmitter
allows the mode indicator lamp to indicate
[
].