manualshive.com logo in svg

Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW370C4U Series Скачать руководство пользователя страница 10

1-1

1. FOR SAFETY OPERATION

 Request to customers

•  

Read preventive measures 
against danger and cautions 
stated in this manual for prop-
er understanding.

•  

Most accidents related to the 
crane occur due to operation, 
maintenance, and inspection 
which have failed in observing 
basic safety regulations.

 … Failure to observe this may invite an accident resulting in injury or death.

CAUTION

 …  Failure to observe this may cause damage to the crane.

 

◆

Store this operator's manual where it is easily accessible to read it over and over again.

 

◆

 

Failure to observe the right operation and maintenance/inspection illustrated in 
this manual may cause trouble in the crane and may invite an accident, and this 
will not only shorten its service life but will impair safety in the crane operation. 
Please remember, in such cases, that no warranty will be given even if the crane is within 
valid warranty period.

 

◆

 In order to prevent injury or death to crane operators and to those who stand close to crane 
operating area due to operational mistake, caution plates are stuck on the crane.  
You are requested to read them carefully.

 

◆

Do not alter the crane.

•   If you want to make an alteration, contact with UNIC sales agent or an authorized service 

shop.

•    UNIC does not bear any responsibility for troubles and /or accidents due to unauthorized 

alteration.

Observe all the safety regulations ! 

 

◆

 Never failed to observe 

 and 

CAUTION

 described in the manual as 

they are of great importance in safety and the crane operation.

Содержание URW370C4U Series

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды