Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 147 / 248

12-41
U-WAVE, Radio remote control device, (Option)
4.
◆
How to make an emergency stop
• How to make an emergency stop for
the crane and reset it
Emergency stop switch
Emergency
stop switch
Head light
In case of emergency such as that the crane does not stop operation or the engine will not return
to idling speed even if no crane operation has been made, depress the “EMERGENCY” switch
on the switch panel.
This makes the crane and the engine to stop operation forcibly.
When releasing the emergency stop switch, release it while no crane
operation is being carried out.
Releasing the emergency stop switch while operating the crane allows
the crane to make an abrupt movement that is very dangerous.
WARNING
Depress the “EMERGENCY” stop switches
on the switch panel of crane body and near
head light.
The switch is held pushed in allowing the
engine to stop operation.
When the switch is held pushed in, the engine
cannot be re-started.
Rotate the emergency stop switch clockwise
in arrow direction to return to its original
state to release the switch.
Remarks
When the emergency stop is reset by turn-
ing the “EMERGENCY” stop switch clock-
wise after the crane has been stopped by
depression of “EMERGENCY” stop switch,
the engine speed may increase in a moment
which is not abnormal.
When the crane is operated with the
“EMERGENCY” stop switch held pushed
in, voice message, “Beep. Service remote
Service remote control” may be issued or
the mode indicator lamp may show incorrect
indication.