manualshive.com logo in svg

Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW370C4U Series Скачать руководство пользователя страница 162

13-12

MAINTENANCE AND INSPECTION OF CARRIER

•  Do not crawl over lying rocks or stones with sharp edges. 
•  Do not change direction where there is a difference in ground level.
•  

Do not make a quick change of direction as it may cause the wheels 
to go off the rubber crawler. 

•  

Do not operate the crane on a ground being heated to the tempera-
ture of more than 140°F(60°C).

•  

Do not stain the rubber crawler with oils such as fuel, hydraulic oil, 
grease, and the other oil.

•  Do not operate the crane at a place where salt content is abundant.
•  

When storing the crane for long period of time, store it indoors where 
it will not be exposed to the ray of the sun or to the rain directly.

CAUTION

Содержание URW370C4U Series

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды