manualshive.com logo in svg

Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW370C4U Series Скачать руководство пользователя страница 11

2-1

2. SAFETY PRECAUTIONS ON CARRIER OPERATION

 Before operation

Observe the cautions for securing safety. 
Failure to observe the cautions may cause trouble or serious accident.

2 

Be sure to make inspection before oper-
ation and periodical voluntary inspec-

tion. 

 

    

If found something wrong, repair it immedi-
ately.

3 

The crane is prohibited to crawl on a 
public road by the road traffic law.

1 

Dress neatly and wear protectors such as 
helmet, safety shoes, and gloves without 

fail.
Do not wear baggy clothes and accessories 
which can be caught by control levers and fit-
tings, and oil-stained working clothes which 
may catch fire.

WARNING

4 

Check that no safety covers have been 
left removed.

It is very dangerous to start the engine, 
to operate the crane with the safety cover 
removed as the driving mechanism is 
exposed.

5 

Be sure to stop the engine before refuel-
ing or supplying and changing lubricant.

A fire source such as smoking cigarette in 
mouth is strictly prohibited. 

 

Failure to observe this may cause a fire.

6 

When starting the engine in a small lim-
ited area or indoors, open the windows 

and doors for well ventilation.
Poor ventilation may invite an exhaust gas 
poisoning.

7 

Shift the interlock for crane-crawl lever 
to “Crawl” when crawling the crane.

Crane will not work by controlling crane 
operation levers with the interlock for crane-
crawl lever shifted to “Crawl”.

Pedal

Crawling

Interlock for crane-crawl
operation

Crawling lever

Содержание URW370C4U Series

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды