Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 192 / 248

14-6
2in. (50mm)
1.57in. (40mm)
a
Wire rope end
Notch
Wire clip
(Pay attention to
mounting direction)
Arrow mark
Wedge
(Wire rope diameter: 5/16in.(8mm))
(2) Do not forget to mount the wedge and the
wire clip as illustrated in the figure in the
left.
Leave the wire rope end to allow a dis-
tance from the notch to the rope end by
more than 1.57in.(40mm) as illustrated in
the figure as “a”.
(1) When passing the wire rope end through
the wire socket, be sure to pass it as indi-
cated by the arrow mark on the socket.
If it is passed from the opposite direction,
service life of wire rope shortens as the
wire rope is kept bent all the time.
2.
How to fix wire rope end.
Projection on upper part
of wire socket
Stopper
If rope end is left by more
than 1.57 in. (40mm) (as
“a” illustrated above),
rope end is visible
through this hole.
If not, adjust the distance
of rope end.
Pass the pin through and
tighten it with bolt securely.
(3) Pass the pin through with the wire socket
held with your hand and tighten it with
the bolt securely.
MAINTENANCE AND INSPECTION OF CRANE