manualshive.com logo in svg

Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW370C4U Series Скачать руководство пользователя страница 131

12-25

U-WAVE, Radio remote control device, (Option)

3. 

◆

How to store hook

•  

Since releasing the hook from 
its stored position allows it to 
swing, it may cause an acci-
dent if a person stands under 
or in front of the hook. 
In addition, excessive pulling 
of the “speed lever” increases 
the hook to swing that is dan-
gerous so that do not pull the 
lever extremely.

•  

It is strictly prohibited to oper-
ate the crane with the “storing 
hook” as this is very danger-
ous.

•  

Retract the boom fully and 
lower it to its extreme to store 
it.

•  

Do not operate the “storing 
hook” with any one of control 
levers at the same time. 
This may cause an incorrect 
action and/or a breakdown of 
the crane.

•  

Pay attention that the manu-
al control lever for “hook Up/
Down” moves “Up” side when 
retracting the hook.

WARNING

Содержание URW370C4U Series

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды