manualshive.com logo in svg

Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Furukawa Unic URW370C4U Series Скачать руководство пользователя страница 243

18-5

MODE INDICATOR LAMP (CONTROL BOX)

Mode

Description of wrong operation

Measures to be taken

Radio remote control operation is carried out in 
manual control mode.

●

Mode indicator lamp located in front of crane 

control levers will not be lit when in manual 
control mode.

Radio remote control cannot be carried out in 
manual control mode.
When operating with radio remote controller, 
turn the selector switch located on the top of 
cover to radio remote control mode.

●

Mode indicator lamp located in front of crane 

control levers will be lit when in radio remote 
control mode.

Crane is being operated when in outrigger 
mode.

Crane cannot be operated when in outrigger 
control mode.
When operating crane, turn the mode selector 
switch to “crane” to select crane mode.

Crane and outriggers are operated simultane-
ously.

When crane and outriggers are operated simul-
taneously, both operating functions are stopped 
automatically to avoid a risk.
Stop the simultaneous operation once and carry 
out either one of operation.

“Low temperature operation mode” is being 
switched during crane operation.

In order to avoid a risk, “low temperature op-
eration mode” cannot be switched during crane 
operation.
Stop crane operation once to switch it to “low 
temperature operation mode”.
For switching “low temperature operation 
mode”, refer to section 12.   “

◆

7.How to op-

erate when engine speed becomes unstable due 
to low temperature” (on page 12-33).

Mode description when crane is mistakenly operated (Blinking indication)

3. 

◆

Mode indication when crane is mistakenly operated

When prohibited operation or combination of operation which may invites dangerous situations 
has been carried out, the “mode indicator lamp” will blink corresponding numbers (operation 
error indication).
When the operation error is indicated, the “mode indicator lamp” blinks showing corresponding 
numbers accordingly.
Confirm and follow the mode description concerned on the table illustrated below:

The operation error indication is not to indicate that the crane system is in trouble.
The error indication is to be reset when stopping the operation concerned. 

 Remarks

Содержание URW370C4U Series

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды