Furukawa Unic URW370C4U Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 248

2-4
SAFETY PRECAUTIONS ON CARRIER OPERATION
1
Return the crawling lever and run the
engine at a low speed.
After operation
2
Shift the crawling lever to “Crane” posi-
tion.
3
Stop the engine and remove dirt and dust
stuck on the crane body.
Since dust stuck on the battery, electric wir-
ing, and engine related components such as
muffler may cause a fire in particular, be sure
to remove it.
4
Cover the crane or store it in a storage
house to prevent it from being accessed
by unrelated persons such as children.
Cover the crane after heated sections have
been cooled off.
Putting a cover on while the crane body is
still hot may cause a fire.
5
Remove the starter switch key to store.
Failure to disconnect it may cause a fire as
cables short-circuited by gnawing animals
such as rat.
6
Disconnect a battery cable before the
crane is to be stored for a long period of
time.
Cable (-)
Disconnect
When loading and
unloading
1
When loading and unloading the crane,
use a non-slip foot-board with a enough
capacity of strength, width, and length and
run the crane straight up and down at a very
low
speed.
Changing direction of the crane on the foot-
board may cause the crane to fall off.
2
Stop the engine, apply parking brake,
and put drags to wheels to secure the
mounting vehicle when loading and unload-
ing the crane.
Failure to observe this may cause the crane
to fall off because the vehicle shift while it is
being loaded and unloaded.
Work by following the instructions illustrated
in the sticker, “Loading and unloading proce-
dures”. (Refer to page 6-6.)