Full Spectrum Laser MUSE 3D Скачать руководство пользователя страница 88

Страница: 88 / 102

Technical Support is available 8am-5pm PST. Monday - Friday

•

702-802-3103

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

SECTION VIII. HARDWARE & MAINTENANCE

With a little care and maintenance, your Muse 3D Laser Cutter will remain clean and continue to run
at top efficiency for years to come. Be aware of all safety and maintenance issues with your machine
by following all the safety instructions in this manual.

Replacing the Laser Tube

This section provides procedures and a walkthrough to replace the laser tube on your Muse 3D.
Although it should last for hundreds of projects, the laser tube is considered a consumable and will
eventually need to be replaced. Please carefully read all instructions before beginning the
replacement procedure as there are several critical steps which must be properly followed to avoid
breaking the laser tube. The included pictures show how to properly connect wires to the tube’s
electrodes and secure the connections.

REQUIRED PARTS AND TOOLS:

•

45W REPLACEMENT TUBE

•

2.5 MM HEX WRENCH

FRAGILE GLASS!

Pulling on the tube wires will break

your laser tube at the neck. The water connections are very

fragile, DO NOT pull or force the connection tubes— gently

work the tubes off of the connectors.

SHOCK WARNING!

The capacitors in the power supply

retain power even after turning the laser off. To ensure your

safety, turn off the laser, remove the power cord and wait at

least 1 hour before accessing the power supply.

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

SECTION VIII. HARDWARE & MAINTENANCE

With a little care and maintenance, your Muse 3D Laser Cutter will remain clean and continue to run

at top efficiency for years to come. Be aware of all safety and maintenance issues with your machine

by following all the safety instructions in this manual.

Replacing the Laser Tube

REQUIRED PARTS AND TOOLS:

•

45W REPLACEMENT TUBE

•

2.5 MM HEX WRENCH

FRAGILE GLASS!

Pulling on the tube wires will break

your laser tube at the neck. The water connections are very

fragile, DO NOT pull or force the connection tubes— gently

work the tubes off of the connectors.

SHOCK WARNING!

The capacitors in the power supply

retain power even after turning the laser off. To ensure your

safety, turn off the laser, remove the power cord and wait at

least 1 hour before accessing the power supply.

Section VIII.

Hardware & Maintenance

Replacing the Laser Tube

With a little care and maintenance, your Muse 3D Laser Cutter will remain clean and continue to run at top

efficiency for years to come. Be aware of all safety and maintenance issues with your machine by following all

the safety instructions in this manual.

This section provides procedures and a walkthrough to replace the laser tube on your Muse 3D. Although it

should last for hundreds of projects, the laser tube is considered a consumable and will eventually need to

be replaced. Please carefully read all instructions before beginning the replacement procedure as there are

several critical steps which must be properly followed to avoid breaking the laser tube. The included pictures

show how to properly connect wires to the tube’s electrodes and secure the connections.

Required Parts and Tools

• 45W Replacement Tube
• 2.5 mm Hex Wrench

The Laser Tube Glass is fragile. Pulling on the tube wires will break your laser

tube at the neck. The water connections are very fragile. Do not pull or force the

connection tubes— gently work the tubes off of the connectors

The capacitors in the power supply retain power even after turning the laser off.

To ensure your safety, turn off the laser, remove the power cord and wait at least 1

hour before accessing the power supply.

Содержание MUSE 3D







































































































Результаты поиска

Содержание MUSE 3D

Отзывы:

Похожие инструкции для MUSE 3D

Бренды по названию

Популярные бренды

Full Spectrum Laser MUSE 3D, Руководство по эксплуатации

Результаты поиска

Содержание MUSE 3D

Отзывы:

Похожие инструкции для MUSE 3D

Бренды по названию

Популярные бренды