Full Spectrum Laser MUSE 3D Скачать руководство пользователя страница 56

Страница: 56 / 102

RetinaEngrave v3.0 Software

Technical Support is available from 8am to 5pm (PST) M - F at [email protected].

SECTION VI. SOFTWARE

Using RetinaEngrave v3.0 Software

In this section you will be introduced to the major interface features of RetinaEngrave

v3.0.

Figure 6.1

Technical Support is available 8am-5pm PST. Monday - Friday

[email protected]

•

702-802-3103

Setting Vector Speed

Speed settings determine how quickly the object will be engraved. Lowering speed allows you to create deeper

engravings, as it allows the laser beam to be in contact with the material for a longer period of time.

Passes

This allows the operator to assign how many times the laser will complete a full cycle. Adding passes creates

deeper cuts. Setting passes to “0” will disable the respective color layer.

Setting Pulse Rate

This allows you to set the pulse rate of the laser which is the number of emitted pulses per second. The pulse

rate ranges from 20000 to 80000. Lower pulse rates result in deeper engravings while higher pulse rates result

in shallower marks.

Wobble

Widens the beam path by running vectors along concentric circles.

Amplitude

Affects the diameter of the wobble. Bigger amplitude means a larger diameter wobble.

Spacing

Affects the spacing of the wobble. Higher values means the wobbles are spaced further apart.

Show All Parameters

This toggle switch displays or hides all possible vector tags as a series of color options. Often when performing

both vector cuts and raster engraving, it is a good idea to change the color of the vector cut to something other

than black. This will avoid the laser detecting the vector cut as part of the raster.

We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will instruct the

laser using our vector properties In this design, the blue lines will not be cut through on our material, but

instead will be marked, as the red outline still cuts.

Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to engrave

an image, and then cut the image out with a vector outline. In this case the laser will raster in the black fill and

cut the red line.

Содержание MUSE 3D







































































































Результаты поиска

Содержание MUSE 3D

Отзывы:

Похожие инструкции для MUSE 3D

Бренды по названию

Популярные бренды

Full Spectrum Laser MUSE 3D, Руководство по эксплуатации

Результаты поиска

Содержание MUSE 3D

Отзывы:

Похожие инструкции для MUSE 3D

Бренды по названию

Популярные бренды