Technical Support is available 8am-5pm PST. Monday - Friday
•
702-802-3103
71
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
70
Passes
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes
creates deeper cuts. Note that if you delete a vector line (by clicking “-“), set passes to “0” first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
of the raster.
Basic Vector Cutting Example
Vector Marking Example
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
our material, but instead will be marked, as the red outline still cuts.
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
70
Passes
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes
creates deeper cuts. Note that if you delete a vector line (by clicking “-“), set passes to “0” first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
of the raster.
Basic Vector Cutting Example
Vector Marking Example
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
our material, but instead will be marked, as the red outline still cuts.
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
70
Passes
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes
creates deeper cuts. Note that if you delete a vector line (by clicking “-“), set passes to “0” first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
of the raster.
Basic Vector Cutting Example
Vector Marking Example
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
our material, but instead will be marked, as the red outline still cuts.
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
70
Passes
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes
creates deeper cuts. Note that if you delete a vector line (by clicking “-“), set passes to “0” first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
of the raster.
Basic Vector Cutting Example
Vector Marking Example
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
our material, but instead will be marked, as the red outline still cuts.
Passes
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes creates
deeper cuts. Note that if you delete a vector line (by clicking “-“), set passes to “0” first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often when performing
both vector cuts and raster engraving, it is a good idea to change the color of the vector cut to something other
than black. This will avoid the laser detecting the vector cut as part of the raster.
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will instruct the
laser using our vector properties In this design, the blue lines will not be cut through on our material, but
instead will be marked, as the red outline still cuts.
Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to engrave
an image, and then cut the image out with a vector outline. In this case the laser will raster in the black fill and
cut the red line.
Basic Vector Cutting Example
Combining Vector and Raster
Vector Marking Example
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
71
Combining Vector and Raster
Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to
engrave an image, and then cut the image out with a vector outline. In this case the laser will raster in
the black fill and cut the red line.
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
71
Combining Vector and Raster
Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to
engrave an image, and then cut the image out with a vector outline. In this case the laser will raster in
the black fill and cut the red line.
Содержание MUSE 3D
Страница 1: ......
