Technical Support is available 8am-5pm PST. Monday - Friday
•
702-802-3103
14
3.Ventilate Outside:
Set the open end outside of a window or an installed ventilation outlet. Check your
system for leaks—most can be remedied with duct tape. Please be aware that the protective housing is
not designed to be airtight; the front grill is designed to allow an exhaust system to draw fresh air through
the work area.
4.Connect to Power:
Plug the exhaust fan power cord into the lower power plug marked “exhaust fan” on
the back of your Muse 3D. Note that accessories plugged into the back of your Muse 3D will only turn on
when the laser is fired (as intended to save power).
5.Fume Extractor Upgrade (optional):
You can also upgrade to a fume extractor. Fume extractors are air
purifiers that clean the air through HEPA Filters. Fume extractors do not require outside ventilation. This is
a great choice for workshops that do not have the option to ventilate outside.
Both the extractors and the filters are available on the Full Spectrum Laser website at
http://fslaser.com/laser-accessories/
Ask a customer support representative which fume extractor is right for your needs.
Fume Extractor filters require routine cleaning and replacement, dependent on use and materials cut.
Generally, fume extractor suction will diminish and odors will be detected as filters clog.
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
17
3. Ventilate Outside:
Set the open end outside of a window or an installed ventilation outlet.
Check your system for leaks—most can be remedied with duct tape. Please be aware that the
protective housing is not designed to be airtight; the front grill is designed to allow an exhaust system
to draw fresh air through the work area.
4. Connect to Power:
Plug the exhaust fan power cord into the lower power plug marked
“exhaust fan” on the back of your Muse 3D. Note that accessories plugged into the back of your
Muse 3D will only turn on when the laser is fired (as intended to save power).
5. Fume Extractor Upgrade (optional):
You can also upgrade to a fume extractor. Fume
extractors are air purifiers that clean the air through HEPA Filters. Fume extractors do not require
outside ventilation. This is a great choice for workshops that do not have the option to ventilate
outside. Both the extractors and the filters are available on the Full Spectrum Laser website at https://
www.fslaser.com/Products/LaserAccessories. Ask a customer support representative which fume
extractor is right for your needs.
Small Fume Extractor
Medium Fume Extractor
Fume Extractor filters require routine cleaning and replacement, dependent on use and materials cut.
Generally, fume extractor suction will diminish and odors will be detected as filters clog.
NEVER
use a fume extractor without all filters in place.
Follow these maintenance guidelines:
Pre-Filters
Clean often. Use a shop vacuum to clean as debris builds. Check weekly, especially if cutting a lot of
wood. When accumulated debris remains over 70% after cleaning, replace Pre-Filter.
HEPA Filters
Clean immediately when suction is reduced. Use a shop vacuum to clean accumulated dust. When
cleaning does not return optimal suction power, replace HEPA Filter.
Activated Carbon Filters
Clean when odors are detected or suction is reduced. Gently shake excess dust and debris from
carbon filter and follow with a shop vacuum. When cleaning no longer eliminates detectable odors,
replace Activated Carbon Filters.
https://www.fslaser.com/Products/LaserAccessories
Small Fume Extractor
Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
17
3. Ventilate Outside:
Set the open end outside of a window or an installed ventilation outlet.
Check your system for leaks—most can be remedied with duct tape. Please be aware that the
protective housing is not designed to be airtight; the front grill is designed to allow an exhaust system
to draw fresh air through the work area.
4. Connect to Power:
Plug the exhaust fan power cord into the lower power plug marked
“exhaust fan” on the back of your Muse 3D. Note that accessories plugged into the back of your
Muse 3D will only turn on when the laser is fired (as intended to save power).
5. Fume Extractor Upgrade (optional):
You can also upgrade to a fume extractor. Fume
extractors are air purifiers that clean the air through HEPA Filters. Fume extractors do not require
outside ventilation. This is a great choice for workshops that do not have the option to ventilate
outside. Both the extractors and the filters are available on the Full Spectrum Laser website at https://
www.fslaser.com/Products/LaserAccessories. Ask a customer support representative which fume
extractor is right for your needs.
Small Fume Extractor
Medium Fume Extractor
Fume Extractor filters require routine cleaning and replacement, dependent on use and materials cut.
Generally, fume extractor suction will diminish and odors will be detected as filters clog.
NEVER
use a fume extractor without all filters in place.
Follow these maintenance guidelines:
Pre-Filters
Clean often. Use a shop vacuum to clean as debris builds. Check weekly, especially if cutting a lot of
wood. When accumulated debris remains over 70% after cleaning, replace Pre-Filter.
HEPA Filters
Clean immediately when suction is reduced. Use a shop vacuum to clean accumulated dust. When
cleaning does not return optimal suction power, replace HEPA Filter.
Activated Carbon Filters
Clean when odors are detected or suction is reduced. Gently shake excess dust and debris from
carbon filter and follow with a shop vacuum. When cleaning no longer eliminates detectable odors,
replace Activated Carbon Filters.
https://www.fslaser.com/Products/LaserAccessories
Large Fume Extractor
M
aintenance guidelines:
Pr
e-Filters:
Clean often. Use a shop vacuum to clean as debris builds. Check weekly, especially if cutting a lot
of wood. When accumulated debris remains over 70% after cleaning, replace Pre-Filter.
HEPA Filters:
Clean immediately when suction is reduced. Use a shop vacuum to clean accumulated dust.
When cleaning does not return optimal suction power, replace HEPA Filter.
Activated Carbon Filters:
Clean when odors are detected or suction is reduced. Gently shake excess dust
and debris from carbon filter and follow with a shop vacuum. When cleaning no longer eliminates detectable
odors, replace Activated Carbon Filters
Never use a fume extractor without all filters in place.
NOTICE
Содержание MUSE 3D
Страница 1: ......
