Fujitsu M10 Series, Руководство по установке, Страница: 369 / 374

Table C-1
XSCF setup command examples
XSCF command example Description Mandatory? Linked section
Making the initial system settings
version -c xcp Displays the XCP version Yes " 6.4 Checking the XCP Version "
flashupdate -c sync Updates the XCP version to match it
on any chassis that has a different
XCP version
Yes " 6.4 Checking the XCP Version "
showaltitude Displays the system altitude Yes " 6.5 Checking the Altitude
Setting "
setaltitude -s altitude=100 Sets the altitude
Example: The system altitude is set to
100 m.
Optional " 6.5 Checking the Altitude
Setting "
rebootxscf -y -a Resets the XSCF Optional
(*1)
" 6.5 Checking the Altitude
Setting "
showtimezone -c tz Displays the XSCF time zone No " 6.6 Checking the Time Setting "
settimezone -c settz -a Lists the time zones that can be set No " 6.6 Checking the Time Setting "
settimezone -c settz -s
Asia/Tokyo
Sets the time zone
Example: "Asia/Tokyo" is set.
Yes " 6.6 Checking the Time Setting "
showdate Displays the XSCF clock date and time Yes " 6.6 Checking the Time Setting "
setdate -s 102016592012.00 Sets the XSCF clock date and time
Example: 16:59:00 on 2012/10/20 in
local time (JST) is set.
Yes " 6.6 Checking the Time Setting "
testsb -v -p -s -a -y Performs an initial diagnosis of the
PSB
Yes " 6.7 Performing a Diagnosis
Test "
showhardconf -M Displays information on each FRUYes " 6.8 Checking the Component
Status "
Appendix C
Setup Command Workflow
This appendix describes the workflow of the XSCF commands executed in
installation of the SPARC M10 systems.
For details, see the linked sections listed in Table C-1 .
355