Fujitsu M10 Series, Руководство по установке, Страница: 22 / 374

Table 1-4 Workflow for the SPARC M10-4S (continued)
Step (work time (*1)) Work description Reference
15 Log in to the SPARC M10-4S, and
check the firmware version number,
altitude setting, and time setting.
" 6.3 Logging In to the XSCF "
" 6.4 Checking the XCP Version "
" 6.5 Checking the Altitude Setting "
" 6.6 Checking the Time Setting "
Required
16 Perform an initial diagnosis test on the
physical system board (PSB).
" 6.7 Performing a Diagnosis Test " Required
17 Check the status of mounted
components.
" 6.8 Checking the Component
Status "
Required
Initial system settings (approx. 92 minutes)
18 Set the password policy. " 7.1 Setting the Password Policy " Required
19 Set a user account and password. " 7.2 Setting a User Account and
Password "
Required
20 Configure the telnet or SSH service. " 7.3 Configuring the Telnet/SSH
Service "
Required
21 Configure the HTTPS service. " 7.4 Configuring the HTTPS
Service "
Required
22 Configure the XSCF network. " 7.5 Configuring the XSCF
Network "
Required
23 When duplicating memory, configure
memory mirroring.
" 7.6 Configuring Memory
Mirroring "
Optional
24 Create the PPAR configuration
information (PCL).
" 7.7 Creating a Physical Partition
Configuration List (PCL) "
Required
25 Assign the system board (PSB) to the
physical partition.
" 7.8 Assigning a System Board
(PSB) to a Physical Partition (PPAR) "
Required
26 Set a CPU operational mode for the
physical partition.
" 7.9 Setting a CPU Operational
Mode for the Physical Partition "
Optional
27 Clear the difference between the
system time and physical partition
(PPAR) time.
" 7.10 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time "
Required
28 Add a CPU Activation key to the
system.
" 7.11 Registering a CPU Activation
Key "
Required
(*4)
29 Assign CPU resources to the physical
partition.
" 7.12 Assigning CPU Core
Resources "
Required
30 Confirm the start/stop of the physical
partition and the connection of the
console.
" 7.13 Starting and Stopping a
Physical Partition (PPAR) "
Required
*1 Average work time for the 4BB configuration
*2 Time required for mounting optional components is not included.
*3 If the optional components are ordered together with the chassis, they are shipped mounted to the chassis.
*4 One CD-ROM disk containing a CPU Activation certificate is provided with the system. The system may be shipped with a registered
CPU Activation key.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015 8