Fujitsu LifeBook S762, Руководство пользователя

Страница: 81 / 390

75 - Memory Upgrade Module
Removing a Memory Upgrade Module
1
Perform steps 1 through 5 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module from the slot by lifting it and pulling it away from your notebook.
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screws.
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
Check the memory capacity by doing the following: from Modern Start screen press [W[X], then select
Control Panel > System . The amount of memory is displayed next to Installed Memory (RAM): The amount of
memory displayed should be approximately the total of all memory modules installed. There may be a discrepancy
which is allocated for fixed video memory.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
. O
NCE IT IS INSTALLED
,
YOU SHOULD LEAVE IT
IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY
.
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
,
CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED
. (I
F THE MODULE IS
PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED
,
SEE
T
ROUBLESHOOTING ON PAGE
85
.