Fujitsu LifeBook S762, Руководство пользователя

Страница: 56 / 390

50 - Starting Your LIFEBOOK Notebook
Boot Sequence
The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook’s BIOS. When
your notebook is first turned on, the main system memory is empty, and it needs to find instructions to start up your
notebook. This information is in the BIOS program. When you power up or restart your notebook, it goes through a
boot sequence which displays a Fujitsu logo until your operating system is found. During booting, your notebook
perform a standard boot sequence including a Power On Self Test (POST). When the boot sequence completes without
a failure and without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen.
The boot sequence is executed when:
• You turn on the power to your LIFEBOOK notebook.
•
You restart your LIFEBOOK notebook from [Settings]->[Power] menu.
•
The software initiates a system restart. Example: When you install a new application.
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive(s). This feature is
managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about accessing the utility.
N
EVER TURN OFF YOUR
LIFEBOOK
NOTEBOOK DURING THE
P
OWER
O
N
S
ELF
T
EST
(POST)
OR IT WILL CAUSE AN ERROR MESSAGE TO BE
DISPLAYED WHEN YOU TURN YOUR
LIFEBOOK
NOTEBOOK ON THE NEXT TIME
. See “Power On Self Test Messages” on page 94.
R
EMEMBER YOUR PASSWORDS
. I
F YOU SET AND FORGET YOUR
U
SER AND
M
ASTER HARD DISK PASSWORDS
, F
UJITSU
A
MERICA WILL NOT BE ABLE
TO RESET IT
. Y
OU MAY LOSE DATA AND HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE
.