Fujitsu LifeBook S762, Руководство пользователя

Страница: 78 / 390

72 - Using ExpressCards
See your ExpressCard manual for instructions on the installation of your card. Some cards may require that your
notebook is off while installing them.
To install an ExpressCard, follow these steps:
1
When not in use, you should keep the ExpressCard plug inserted in the slot to prevent system contamination.
Make sure there is no card or plug currently in the slot. If there is, see Removing ExpressCards (below).
2
If the eject button is extended, press it in until it clicks.
3
Insert your card into the slot with the product label facing up.
4
Push the card firmly into the slot until it is seated in the connector.
Removing ExpressCards
See your ExpressCard manual for specific instructions on removing your card. Some cards may require your notebook
to be in Standby Mode or Off during removal.
To remove an ExpressCard, follow these steps:
1
Unlock the card or card plug from the slot by pressing the eject button. When pressed, the button will pop out.
2
Firmly press the button again until it is flush with the notebook. This will eject the card slightly out of the slot
allowing you to remove the card.
Y
OU MAY BE REQUIRED TO LOG ON AS
A
DMINISTRATOR OR A MEMBER OF THE
A
DMINISTRATOR
’
S
G
ROUP TO COMPLETE THIS PROCEDURE
. I
F YOUR
COMPUTER IS CONNECTED TO A NETWORK
,
NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE
.
•
W
INDOWS HAS A SHUTDOWN PROCEDURE FOR
E
XPRESS
C
ARDS THAT MUST BE FOLLOWED BEFORE REMOVING A CARD
. (R
EVIEW YOUR OPERATING
SYSTEM MANUAL FOR THE CORRECT PROCEDURE
.) I
T IS GOOD PRACTICE TO REMOVE DEVICES USING THE
S
AFELY
R
EMOVE
H
ARDWARE ICON IN THE
SYSTEM TRAY
.
•
I
F THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED
,
YOU MUST SAVE ALL OF YOUR OPEN FILES
,
CLOSE ANY OPEN APPLICATIONS AND
SHUT DOWN YOUR NOTEBOOK
.