manualshive.com logo in svg

Fujitsu F2 MC-8FX Family, Руководство по оборудованию

Семейство продуктов Fujitsu F2 MC-8FX предоставляют высокопроизводительную аппаратную базу для вашего бизнеса. На manualshive.com вы можете бесплатно скачать руководство по оборудованию для полноценной работы с вашим устройством. Узнайте больше о возможностях вашего устройства, загрузив его руководство прямо сейчас.

Поделиться
Скачать
background image

337

CHAPTER 20  UART/SIO

Table 20.5-2   Functional Description of Each Bit of UART/SIO Serial Mode Control Register 2 (SMC20)

Bit name

Function

bit7

SCKE:
Serial clock output 
enable bit

This bit controls the input/output of the serial clock (UCK) pin in clock synchronous mode.
Setting the bit to "0" allows the pin to be used as a general-purpose port.
Setting the bit to "1" enables clock output.
Note:

When CKS is "1", the internal clock signal is not outputted even with this bit set to "1".
If this bit is set to "1" with SCM1:MD set to 0 (asynchronous mode), the output from the 
port will always be "H".

bit6

TXOE:
Serial data output 
enable bit

This bit controls the output of the serial data (UO pin).
Setting the bit to "0" allows the pin to be used as a general-purpose port.
Setting the bit to "1" enables serial data output.

bit5

RERC:
Reception error flag 
clear bit

Setting the bit to "0" clears the SSR register error flags (PER, OVE, FER).
Setting the bit to "1" clears the reception error flag.
• Reading this bit always returns "1".

bit4

RXE:
Reception operation 
enable bit

Setting the bit to "0" disables the reception of serial data.
Setting the bit to "1" enables the reception of serial data.
• If this bit is set to "0" during reception, the reception operation will be immediately disabled and 

initialization will be performed. The data received up to that point will not be transferred to the 
UART/SIO serial input data register. 

Note:

Setting this bit to "0" initializes reception operation. It has no effect on the interrupt flags 
(PER, OVE, FRE, RDRF).

bit3

TXE:
Transmission operation 
enable bit

Setting the bit to "0" disables the transmission of serial data.
Setting the bit to "1" enables the transmission of serial data.
• If this bit is set to "0" during transmission, the transmission operation will be immediately disabled 

and initialization will be performed. The transmission completion flag (TCPL) will be set to "1" 
and the transmission data register empty (TDRE) bit will also be set to "1".

bit2

RIE:
Reception interrupt 
enable bit

Setting the bit to "0" disables reception interrupt.
Setting the bit to "1" enables reception interrupt.
• A reception interrupt occurs immediately after either the receive data register full (RDRF) bit or an 

error flag (PER, OVE, FER, or RDRF) is set to "1" with this bit set to "1" (enabled).

bit1

TCIE:
Transmission 
completion interrupt 
enable bit

Setting the bit to "0" disables interrupts by the transmission completion flag.
Setting the bit to "1" enables interrupts by the transmission completion flag.
• A transmission interrupt occurs immediately after the transmission completion flag (TCPL) bit is 

set to "1" with this bit set to "1" (enabled).

bit0

TEIE:
Transmission data 
register empty interrupt 
enable bit

Setting the bit to "0" disables interrupts by the transmission data register empty.
Setting the bit to "1" enables interrupts by the transmission data register empty.
• A transmission interrupt occurs immediately after the transmission data register empty (TDRE) bit 

is set to "1" with this bit set to "1" (enabled).

Содержание F2 MC-8FX Family



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F2 MC-8FX Family

EAW MX8000 Technical Specifications preview
MX8000
Бренд: EAW Страницы: 2
Hal Communications RS2100 Instruction Manual preview
RS2100
Бренд: Hal Communications Страницы: 25
Patton electronics RocketLink-G 3088/I Getting Started Manual preview
RocketLink-G 3088/I
Бренд: Patton electronics Страницы: 61
T&D RTR-50 User Manual preview
RTR-50
Бренд: T&D Страницы: 122
Salto Node Installation Manual preview
Node
Бренд: Salto Страницы: 2
Oracle Talari E1000 Installation Manual preview
Talari E1000
Бренд: Oracle Страницы: 24
Dahua DHI-NVR2104-P-4KS2 Quick Start Manual preview
DHI-NVR2104-P-4KS2
Бренд: Dahua Страницы: 23
MF DIGITAL DIRECTOR PRO series Operator'S Manual preview
DIRECTOR PRO series
Бренд: MF DIGITAL Страницы: 79
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Бренд: National Instruments Страницы: 130
IBM Power System S914 Installing Instructions preview
Power System S914
Бренд: IBM Страницы: 48
iesy Open Standard Module RPX30 EVA-MI V1 Quick Start Manual preview
Open Standard Module RPX30 EVA-MI V1
Бренд: iesy Страницы: 9
Black Box Secure Site Manager 16 Quick Start Manual preview
Secure Site Manager 16
Бренд: Black Box Страницы: 16
AMD -K6-2/450 - MHz Processor Application Note preview
-K6-2/450 - MHz Processor
Бренд: AMD Страницы: 98
Z3 Technology FSDI-1XA User Manual preview
FSDI-1XA
Бренд: Z3 Technology Страницы: 83
OWC ENVOY PRO MINI User Manual preview
ENVOY PRO MINI
Бренд: OWC Страницы: 7
Patton electronics 3196RC User Manual preview
3196RC
Бренд: Patton electronics Страницы: 93
Linksys HPES03 User Manual preview
HPES03
Бренд: Linksys Страницы: 17
Bosch D9210B Operation And Installation Manual preview
D9210B
Бренд: Bosch Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды