manualshive.com logo in svg

Fujitsu F2 MC-8FX Family, Руководство по оборудованию

Семейство продуктов Fujitsu F2 MC-8FX предоставляют высокопроизводительную аппаратную базу для вашего бизнеса. На manualshive.com вы можете бесплатно скачать руководство по оборудованию для полноценной работы с вашим устройством. Узнайте больше о возможностях вашего устройства, загрузив его руководство прямо сейчас.

Поделиться
Скачать
background image

249

CHAPTER 16  8/16-BIT COMPOSITE TIMER

Table 16.5-3  Functional Description of Each Bit of 8/16-bit Composite Timer 00/01 Timer Mode Control 
Register (TMCR0) (1 / 2)

Bit name

Function

bit7

TO1:
Timer 01 output bit

This bit indicates the output value of timer 01. When the timer starts operation (T00CR1/
T01CR1:STA = 1), the value in the bit changes depending on the selected timer function.
• Writing to this bit has no effect on the operation.
• The value in the bit remains indeterminate during 16-bit operation when the PWM timer function

(variable-cycle mode) or input capture function has been selected.

• When the timer stops operation (T00CR1/T01CR1:STA = 0) in interval timer or PWC timer

function, this bit holds the last value.

• When the timer stops operation in PWM timer function (fixed-cycle mode), this bit holds the last

value.

• When the timer operation mode select bit (T00CR0/T01CR0: F3, F2, F1, F0) is changed with the

timer being stopped, the bit indicates the last value of timer operation if the same timer operation
has ever been performed or otherwise contains "0". 

bit6

TO0:
Timer 00 output bit

This bit indicates the output value of timer 00. When the timer starts operation (T00CR1/
T01CR1:STA = 1), the value in the bit changes depending on the selected timer function.
• Writing to this bit has no effect on the operation.
• The value in the bit remains indeterminate when the input capture function has been selected.
• When the timer stops operation (T00CR1/T01CR1:STA = 0) in interval timer, PWM timer

(variable-cycle mode), or PWC timer function, this bit holds the last value.

• When the timer stops operation in PWM timer function (fixed-cycle mode), this bit holds the last

value.

• When the timer operation mode select bit (T00CR0/T01CR0: F3, F2, F1, F0) is changed with the

timer being stopped, the bit indicates the last value of timer operation if the same timer operation
has ever been performed or otherwise contains "0".

bit5

IIS:
Timer 00 internal 
signal select bit

This bit selects the signal input to timer 00 when the PWC timer or input capture function has been
selected.
Writing "1" : selects the internal signal (TII0) as the signal input for timer 00.
Writing "0" : selects the external signal (EC00) as the signal input for timer 00.

bit4

MOD:
16-bit mode enable bit

This bit selects 8-bit or 16-bit operation mode.
Writing "1" : allows timers 00 and 01 to operate as a 16-bit timer.
Writing "0" : allows timers 00 and 01 to operate as separate 8-bit timers.
• This bit is set to "0" automatically when the timer starts operation (T00CR1/T01CR1:STA=1) in

PWM timer mode (variable-cycle mode).

• Write access to this bit is nullified during timer operation (T00CR1:STA = 1 or T01CR1:STA = 1).

bit3
bit2

FE11, FE10:
Timer 01 filter function 
select bits

These bits select the filter function for the external signal (EC01) to timer 01 when the PWC timer
or input capture function has been selected.

• Write access to these bits is nullified during timer operation (T01CR1:STA = 1).
• The settings of the bits have no effect on operation when the interval timer or PWM timer function

has been selected (filter function does not operate.).

FE11

FE10

Timer 01 filter function select bits

0

0

No filtering

0

1

Removing H pulse noise

1

0

Removing L pulse noise

1

1

Removing H/L pulse noise

Содержание F2 MC-8FX Family



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F2 MC-8FX Family

GE 90-30 PLC User Manual preview
90-30 PLC
Бренд: GE Страницы: 93
2N OfficeRoute Quick Manual preview
OfficeRoute
Бренд: 2N Страницы: 11
2N stargate How To Set preview
stargate
Бренд: 2N Страницы: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Бренд: 2N Telekomunikace Страницы: 24
Data Translation DT330 Series Getting Started Manual preview
DT330 Series
Бренд: Data Translation Страницы: 60
Renesas F-ZTAT H8/3048 Series User Manual preview
F-ZTAT H8/3048 Series
Бренд: Renesas Страницы: 34
Garland INT10G10SP2 User Manual preview
INT10G10SP2
Бренд: Garland Страницы: 6
Lorex LNR100 SERIES Instruction Manual preview
LNR100 SERIES
Бренд: Lorex Страницы: 186
PairGain PG-FLEX RT FRL-752 Manual preview
PG-FLEX RT FRL-752
Бренд: PairGain Страницы: 6
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Бренд: C&H Страницы: 32
XtendLan NVR-xUD User Manual preview
NVR-xUD
Бренд: XtendLan Страницы: 228
ICP DAS USA USB-87P1 User Manual preview
USB-87P1
Бренд: ICP DAS USA Страницы: 62
Omron ACCURAX G5 - Quick Start Manual preview
ACCURAX G5 -
Бренд: Omron Страницы: 13
EK EK-Quantum Momentum ROG Rampage VI Encore User Manual preview
EK-Quantum Momentum ROG Rampage VI Encore
Бренд: EK Страницы: 11
IFM Electronic OVP800 Operating Instructions Manual preview
OVP800
Бренд: IFM Electronic Страницы: 14
ebm-papst W3G710-NK67-01 Operating Instructions Manual preview
W3G710-NK67-01
Бренд: ebm-papst Страницы: 13
Alarm NX-208E Installation Manual preview
NX-208E
Бренд: Alarm Страницы: 5
Primera Disc Publisher XR Installation Instructions preview
Disc Publisher XR
Бренд: Primera Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды