manualshive.com logo in svg

Fujitsu F2 MC-8FX Family, Руководство по оборудованию

Семейство продуктов Fujitsu F2 MC-8FX предоставляют высокопроизводительную аппаратную базу для вашего бизнеса. На manualshive.com вы можете бесплатно скачать руководство по оборудованию для полноценной работы с вашим устройством. Узнайте больше о возможностях вашего устройства, загрузив его руководство прямо сейчас.

Поделиться
Скачать
background image

323

CHAPTER 19  INTERRUPT PIN SELECTION CIRCUIT

Table 19.4-1  Functional Description of Each Bit of Interrupt Pin Selection Circuit Control Register (WICR) 
(1 / 2)

Bit name

Function

bit7

Unused bit

This bit is not used.
• Reading always returns "0".
• Writing has no effect on the operation.

bit6

INT00:
IINT00 interrupt pin 
select bit

This bit is used to determine whether to select the INT00 pin as an interrupt input pin.
Writing "0" to the bit deselects the INT00 pin as an interrupt input pin and the circuit treats the 
INT00 pin input as being fixed at "0".
Writing "1" to the bit selects the INT00 pin as an interrupt input pin and the circuit passes the 
INT00 pin input to INT00 (channel 0) of the external interrupt circuit. In this case, the input signal to 
the INT00 pin can generate an external interrupt if INT00 (channel 0) operation is enabled in the 
external interrupt circuit.

bit5

SI:
SI interrupt pin select 
bit

This bit is used to determine whether to select the SI pin as an interrupt input pin.
Writing "0" to the bit deselects the SI pin as an interrupt input pin and the circuit treats the SI pin 
input as being fixed at "0".
Writing "1" to the bit selects the SI pin as an interrupt input pin and the circuit passes the SI pin 
input to INT00 (channel 0) of the external interrupt circuit. In this case, the input signal to the SI pin 
can generate an external interrupt if INT00 (channel 0) operation is enabled in the external interrupt 
circuit.

bit4

SCK:
SCK interrupt pin 
select bit

This bit is used to determine whether to select the SCK pin as an interrupt input pin.
Writing "0" to the bit deselects the SCK pin as an interrupt input pin and the circuit treats the SCK 
pin input as being fixed at "0".
Writing "1" to the bit selects the SCK pin as an interrupt input pin and the circuit passes the SCK 
pin input to INT00 (channel 0) of the external interrupt circuit. In this case, the input signal to the 
SCK pin can generate an external interrupt if INT00 (channel 0) operation is enabled in the external 
interrupt circuit.

bit3

EC0:
EC0 interrupt pin 
select bit

This bit is used to determine whether to select the EC0 pin as an interrupt input pin.
Writing "0" to the bit deselects the EC0 pin as an interrupt input pin and the circuit treats the EC0 
pin input as being fixed at "0".
Writing "1" to the bit selects the EC0 pin as an interrupt input pin and the circuit passes the EC0 pin 
input to INT00 (channel 0) of the external interrupt circuit. In this case, the input signal to the EC0 
pin can generate an external interrupt if INT00 (channel 0) operation is enabled in the external 
interrupt circuit.

bit2

UI0:
UI0 interrupt pin select 
bit

This bit is used to determine whether to select the UI0 pin as an interrupt input pin.
Writing "0" to the bit deselects the UI0 pin as an interrupt input pin and the circuit treats the UI0 
pin input as being fixed at "0".
Writing "1" to the bit selects the UI0 pin as an interrupt input pin and the circuit passes the UI0 pin 
input to INT00 (channel 0) of the external interrupt circuit. In this case, the input signal to the UI0 
pin can generate an external interrupt if INT00 (channel 0) operation is enabled in the external 
interrupt circuit.

Содержание F2 MC-8FX Family



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F2 MC-8FX Family

Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Бренд: Paradyne Страницы: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Бренд: Paradyne Страницы: 5
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Бренд: Yamaha Страницы: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Бренд: Yamaha Страницы: 5
Ebyte E103-W13 User Manual preview
E103-W13
Бренд: Ebyte Страницы: 14
Delta Tau PMAC2-PC/104 Installation Manual preview
PMAC2-PC/104
Бренд: Delta Tau Страницы: 74
Black Box JPM083A Manual preview
JPM083A
Бренд: Black Box Страницы: 9
Campbell NL115 User Manual preview
NL115
Бренд: Campbell Страницы: 38
HMS Networks Anybus Communicator ABC4021 User Manual preview
Anybus Communicator ABC4021
Бренд: HMS Networks Страницы: 60
Qlogic QLE7xxx Series Quick Start Manual preview
QLE7xxx Series
Бренд: Qlogic Страницы: 8
ZALMAN ZM-RF1 User Manual preview
ZM-RF1
Бренд: ZALMAN Страницы: 5
4gon RouterBOARD 411R Quick Start Manual preview
RouterBOARD 411R
Бренд: 4gon Страницы: 2
Quantum QWCM Installation Manual preview
QWCM
Бренд: Quantum Страницы: 7
ARTERY AT32F421 Series Reference Manual preview
AT32F421 Series
Бренд: ARTERY Страницы: 337
ADTRAN EXPRESS 6503 User Manual preview
EXPRESS 6503
Бренд: ADTRAN Страницы: 20
ZiLOG Z8 GP ZGP323 User Manual preview
Z8 GP ZGP323
Бренд: ZiLOG Страницы: 11
Avigilon NVR5-STD-10GBE Installation Manual preview
NVR5-STD-10GBE
Бренд: Avigilon Страницы: 12
Extreme Networks ExtremeCloud Appliance E1120 User Manual preview
ExtremeCloud Appliance E1120
Бренд: Extreme Networks Страницы: 219

Бренды по названию

Популярные бренды

Загрузить еще бренды