Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
580
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
3
Click the [OK] button.
→
Date/time information is specified.
In the following conditions, an error screen appears:
•
When a non-existent date has been specified in "New Time"
•
When "by day of the week" is selected in Daylight Saving Time,
and the same day and time is entered for both start day/time and
end day/time.
•
When "by Date" is selected in Daylight Saving Time, and the
same date/time is entered for both start date/time and end date/
time
•
When "by Date" is selected in Daylight Saving Time, and a
nonexistent date has been specified as the start date
•
When "by Date" is selected in Daylight Saving Time, and a non-
existent date has been specified as the end date
•
When the "NTP enabled " is selected for "NTP Service Mode" and
MNT is selected as the "LAN Port used for NTP", the IP address
of the NTP server and the broadcast address of the MNT port are
the same
•
When the "NTP enabled " is selected for "NTP Service Mode" and
RMT is selected as the "LAN Port used for NTP", the IP address
of the NTP server and the broadcast address of the RMT port are
the same
•
When the "NTP enabled" is selected for "NTP Service Mode", the
IP address of the NTP server and the local host address are the
same
•
When the "NTP enabled" is selected for "NTP Service Mode", the
IP address of the NTP server is not Class (A, B, C)
•
Click the [Date/Time Information] tab and the [NTP Service] tab to
specify each parameter of date/time information and the NTP
service.
•
When "by day of the week" is selected in Daylight Saving Time,
"Last" can be selected to specify the start or end week.
•
When "by Date" is selected in Daylight Saving Time, "Last Date"
of the selected month can be selected to specify the start or end
date.
