Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
533
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
-
Use Internal Authentication (Any Error Case):
When communication with the RADIUS server fails or communication with the
RADIUS server succeeds but authentication fails, internal authentication is
performed.
-
Use Internal Authentication (Network Error Case):
When communication with the RADIUS server fails, internal authentication is
performed.
-
Do not use Internal Authentication
Even when communication with the RADIUS server fails, or communication with the
RADIUS server succeeds but authentication fails, internal authentication is not
performed.
●
Primary Server (required) / Secondary Server
•
Domain Name/IP Address
Enter the domain name or the IP address of the RADIUS server.
The following input condition applies:
-
1 - 64 alphanumeric characters and symbols
•
Port No.
Enter the port number that is used for RADIUS Authentication.
The following input condition applies:
-
Numeric characters ("1" - "65535")
•
LAN Port
Select the LAN port from "MNT" or "RMT" that is to be used for RADIUS Authentica-
tion.
•
Authentication Mode
Select the authentication method for RADIUS Authentication from "CHAP" and "PAP".
•
Shared Secret
Enter the same Shared Secret as the RADIUS server.
The following input condition applies:
-
1 - 64 alphanumeric characters and symbols
•
Retry Out Time
Select the total time (seconds) for waiting for a response from the RADIUS server.
ETERNUS DX Disk storage system retries authentication during the specified time
(seconds), and if there is no response in the specific time, regards the situation as a
network error.
-
10
-
20
-
30
-
40
-
50
-
60
