Fujitsu Eternus web GUI, Руководство пользователя

Страница: 42 / 635

Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
42
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
3.2 Initial Setup 2
This sets the various reports that are generated when an error occurs in the ETERNUS DX Disk
storage system.
If monitoring the ETERNUS DX Disk storage system, use this wizard to build an environment.
The flow of wizard operations in Initial Setup 2 is shown below.
(1) Set SNMP Agent Basic
Set up the SNMP Agent basic interface in the ETERNUS DX Disk storage system. Refer to
"11.2.3.3 Setup SNMP Agent Basic Interface" (page 464) for details.
(2) Set SNMP Manager
Specify the IP address of the SNMP Agent Manager. Refer to "11.2.3.4 Setup SNMP Agent
Manager" (page 466) for details.
(3) Set SNMP Agent MIB View
Set the MIB View of the SNMP Agent. Refer to "11.2.3.5 Setup SNMP Agent MIB Access
View" (page 468) for details.
(4) Set SNMP Agent User
Set up the user which accesses the SNMP Agent.
The security level and the MIB access range are configured for each user. Refer to
"11.2.3.6
Setup SNMP Agent User" (page 471) for details.
(5) Set SNMP Agent Community
Set up the SNMP Agent Community. Refer to "11.2.3.7 Setup SNMP Agent Community"
(page 474) for details.
(6) Set SNMP Agent Trap
Set up the environment to send notification of events that occur in the ETERNUS DX Disk
storage system to the SNMP Agent Manager by an SNMP Trap. Refer to
"11.2.3.8 Setup
SNMP Agent Trap" (page 477) for details.
(7) Set E-Mail Notification
Set the E-mail notification for events that occur in the ETERNUS DX Disk storage system.
Refer to
"11.2.3.12 Setup E-Mail Notification" (page 484) for details.
(8) Set Syslog Notification
Set up external servers (Syslog server) for sending logs of events that are detected by the
ETERNUS DX Disk storage system. Refer to
"11.2.3.13 Setup Syslog" (page 487) for details.