Chapter 11 System Management
11.1 System Status
ETERNUS Web GUI User’s Guide
444
Copyright 2011 FUJITSU LIMITED
P2X0-1090-02ENZ0
•
Write Through (Pinned Data)
A large amount of pinned data occurred in the ETERNUS DX Disk storage system.
•
Write Through (Battery)
The battery charge level is low.
•
Write Through (Maintenance)
The following maintenance operation is currently being used:
-
Switch Controller Firmware
-
Change Controlling CM
-
Add Controller Module
•
Connecting Module
The CM to which the GUI is connected is displayed.
11.1.2
Network
This function displays the network environment of each port in the ETERNUS DX Disk storage
system.
■
Basic
The network environment of each port, the SNMP information registered in the ETERNUS DX
Disk storage system, and the E-mail information are displayed.
The following items are displayed in the Main area:
•
Port
The port type is displayed.
-
For ETERNUS DX80 S2/DX90 S2: MNT or RMT
-
ETERNUS DX410 S2/DX440 S2: MNT, RMT, or FST
•
Speed and Duplex
The transfer speed and the communication method are displayed.
-
Auto-negotiation
-
1Gbit/s
-
100Mbit/s Half