Fujikura AFL Telecommunications NOYES TURBOTEST 500B Скачать руководство пользователя страница 65

Страница: 65 / 81

Section 8

5 To save test results in a specific memory location, perform the following steps:

• Press either [UP] or [DOWN] arrow key to select a specific memory location to increase or

decrease fiber number.

• Press the [SAVE] soft key to store test results in the selected location.

Once saved, test results can later be retrieved. Refer to the following section.

Reviewing Saved OPM Test Results

1 Prior to reviewing saved tests, select the [OPM] test mode, and then [OPEN] the file to be viewed

(refer to sections titled “Selecting Test Mode”, page 7 and “Opening Files”, page 15).

2 Press the [MENU ]key to display the [OPM MAIN MENU] screen.

3 The [REVIEW RESULTS] option is highlighted by default.

4 Press the [SELECT] soft key to access the [OPM RESULTS] screen (refer to Figure 8-3).

5 Using either [UP] or [DOWN] arrow key highlight the desired test (fiber) number.

• You may press the [MORE] soft key to scroll through saved test results.

6 Press the [HEADER] soft key to change a header display as follows:

• [AUTO RETEST]

• [FILE NAME]

• [ DATE and TIME]

• [UNITS]

Figure 8-3. Reviewing Saved Test Results.

OPM RESULTS

AUTO RETEST
3

TEST

HEADER

Header - displays [AUTO

RETEST] option, or [FILE

name], or [DATE and TIME]

of the selected test, or

[UNITS].

Test results

Press to change a header

display.

Test (fiber) numbers

Highlight bar - indicates

the selected test (fiber).

Use arrow keys to move

the highlight bar.

Press to scroll through saved

test results.

Press to start [AUTO RETEST].

Содержание AFL Telecommunications NOYES TURBOTEST 500B


















































































Результаты поиска

Содержание AFL Telecommunications NOYES TURBOTEST 500B

Отзывы:

Похожие инструкции для AFL Telecommunications NOYES TURBOTEST 500B

Бренды по названию

Популярные бренды

Fujikura AFL Telecommunications NOYES TURBOTEST 500B, Руководство пользователя

Результаты поиска

Содержание AFL Telecommunications NOYES TURBOTEST 500B

Отзывы:

Похожие инструкции для AFL Telecommunications NOYES TURBOTEST 500B

Бренды по названию

Популярные бренды