Fujikura AFL Telecommunications NOYES TURBOTEST 500B, Руководство пользователя

Страница: 33 / 81

23
Section 4
Two TURBOTEST 500B units are required to perform bi-directional insertion loss and return loss tests
on a single fiber. One unit must be operating in the [TURBO] mode while another - in the [REMOTE]
test mode. When the [TURBO] test mode is selected, the LCD display on the MAIN unit shows the
[TURBO] indicator in the upper left part of the screen and the selected wavelength(s) in the upper right
part of the screen. The LCD display on the REMOTE unit shows the [REMOTE] indicator in the upper
left part of the screen.
TURBO TRIPLE nm
RE ADY
FIBER # X
λ
START
REMOTE
RE ADY
Selecting a Test Wavelength
The following procedure is common for all [TURBO] and [OLTS] mode test screens or sub-screen where
the wavelengths selection option is available. To select a wavelength, perform the following steps.
1 Press the [
λ]
to access the [TEST WAVES] screen. The display will read as follows:
TEST WAVES
A - Z Z - A
[ ] 1310 [ X ]
[ X ] 1550 [ X ]
[ X ] 1625
A-Z SELECT
Z to A direction of test
Available wavelengths
A to Z direction of test
[ X ]
indicates that 1625nm,
direction A to Z is selected
[ ]
indicates that 1310nm,
direction A to Z is deselected
[ X ]
Indicates the highlighted
wavelength
[ X ]
2 Press either [UP] or [DOWN] arrow key to highlight the desired wavelength.
3 Press the [A-Z] / [Z-A ] soft key to select the direction of test.
4 Press the [SELECT] soft key to select or deselect the test wavelength.
5 When the desired wavelengths are selected, press the [Back] key to return to the previous
screen.