FujiFilm FRENIC5000G11S Series, Техническая информация

Страница: 53 / 236

2-5
Chapter 2
2. KEYPAD Panel
2
■
KEYPAD panel Operation
Perform the wiring shown in the Basic wiring diagram in Section 3.2, Chapter 1. Turn on inverter power, and use the
or key to set an output frequency. Press the
FUNC
DATA
key, then press the
FWD
or
REV
key.
The inverter starts running using the factory setting function data.
Press the
STOP
key to stop the inverter.
• Procedure for selecting function codes and data codes
The following is a sample procedure for selecting a function code and changing the function data.
q
Press the
PRG
key to switch the operation monitor screen to the program
menu screen.
w
Select “1. DATA SET” , and press the
FUNC
DATA
key.
e
Press the or key to select a target function code. To quickly
scroll the function select screen, press
FUNC SHIFT
key and the or
key at the same time. At the target function, press the
FUNC
DATA
key.
r
Use the , , and
FUNC SHIFT
keys to change the function data to the
target value. (Use the
FUNC SHIFT
key to move the cursor when you want to
enter a numerical value.)
t
Press the FUNC
DATA
key to store the updated function data in memory.
The screen shifts for the selection of the next function.
y
Pressing the
PRG
key switches the screen to the operation monitor
screen.
1) Setting a frequency
When the operation monitor screen is displayed, a frequency can be set by using the or key in both the
operation and stop modes. When the target frequency is displayed, press the
FUNC
DATA
key to enter the frequency in
memory.
2) Switching a unit indication
During both operation and stop modes, each time the FUNC
DATA
key is pressed, the value displayed on the LED monitor
changes, and the unit indication on the LCD monitor shifts from Hz to A, V, r/min, m/min, kW, and % in this order in
accordance with the displayed value.
RUN
FWD
PRG
→
PRG MENU
F/D
→
LED SHIFT
RUN
FWD
PRG
→
PRG MENU
F/D
→
LED SHIFT
→
1. DATA SET
2. DATA CHECK
3. OPR MNTR
4. I / O CHECK
F01 FREQ CMD 1
0
0 ~ 11
F02 OPR METHOD
F03 MAX Hz-1
F04 BASE Hz-1
F05 RATED V-1
F00 DATA PRTC
F01 FREQ CMD 1
F02 OPR METHOD
F03 MAX Hz-1
Chapter02J(P4˜5).p65
07.8.9, 12:26 Page 5
Adobe PageMaker 6.5J/PPC