FujiFilm FRENIC5000G11S Series, Техническая информация

Страница: 23 / 236

1-17
Chapter 1
2. Common Specifications
1
The function marked can be set while the inverter is running. Other functions must be set while the inverter is
stopped.
Function
Setting range Unit
Min. Factory setting
Remarks
Code Name LCD monitor unit 30HP 40HP
H35 (Data length) H35 LENGTH 0 : 8 bit 1 : 7 bit
H36 (Parity check) H36 PARITY 0 : No checking
1 : Even parity
2 : Odd parity
H37 (Stop bits) H37 STOP BITS 0 : 2 bit 1 : 1 bit
H38
(No response error
H38 NO RES t 0 (No detection), 1 to 60s
detection time)
H39 (Response interval) H39 INTERVAL 0.00 to 1.00s
- - 0
- - 0
- - 0
s 1 0
s 0.01 0.01
Hz 1 60
Hz 1 60
V 1
220:(230V class)
380:(460V class)
V 1 220:(230V class)
380:(460V class)
- 0.1 G11S : 2.0
P11S : 2.0
- - 1
A 0.01 Motor rated
current
min 0.1 5.0 10.0
- - 0
- 2 4
kw 0.01 Motor Capacity
A 0.01 Motor rated
current
- - 0
- - 0
A 0.01 Fuji standard
rated value
% 0.01 Fuji standard
rated value
% 0.01 Fuji standard
rated value
Hz 0.01 0.00
Sets the maximum output
frequency for motor 2.
Sets the output voltage at
the Base frequency 2 "A02".
Sets the output voltage at the
Maximum frequency 2 "A01".
Sets the number of poles of
motor 2.
Set the applied motor capacity.
This setting automatically sets
"P03" and "P06" to "P08". Frame
must be from -2 to +1. When a
frame is outside this range, take
a special note.
Sets the motor rated current.
Measure %R1 of motor, and
%X and Io at base
frequency.
When "1" is selected, data
is stored in "A16" and "A17".
When "2" selected, data is
stored in "A15" to "A17".
Data in "A16" and "A17" is
not updated.
Sets exciting current at
torque-vector control.
Sets motor primary coil
resistance manually.
R1: Motor primary resistance [
Ω
]
Cable R : Resistance at output
side cable
V : Rated voltage [V]
I : Motor rated current [A]
Sets motor leakage
inductance at base
frequency manually.
X1 : Motor primary leakage
reactance [
Ω
]
X2 : Motor secondary leakage
reactance [
Ω
]
XM : Excitation reactance [
Ω
]
Cable X : Cable resctance
(Primary conversion value) [
Ω
]
V : Rated voltage [V]
I : Motor rated current [A]
Sets the slip frequency.
Function
Setting range Unit
Min. Factory setting
Remarks
Code Name LCD monitor unit 30HP 40HP
A01 Maximum frequency 2 A01 MAX Hz-2 G11S : 50 to 400Hz P11S : 50 to 120Hz
A02 Base frequency 2 A02 BASE Hz-2 G11S : 25 to 400Hz P11S : 25 to 120Hz
A03 Rated voltage 2 A03 RATED V-2 0V (Free) : The output voltage in proporpion to the
power supply voltage is set. (at Base frequency 2)
80 to 240V : AVR active (230V)
320 to 480V : AVR active (460V)
A04 Maximum voltage 2 A04 MAX V-2 80 to 240V : AVR active (230V)
(at Maximum frequency 2)
320 to 480V : AVR active (460V)
A05 Torque boost 2 A05 TRQ BOOST2 0.0 : Automatic (for constant torque load)
0.1 to 0.9 : Manual (for variable torque load)
1.0 to 1.9 : Manual (
for proportional torque load
)
2.0 to 20.0 : Manual (for constant torque load)
A06 Electronic (Select) A06 ELCTRN OL2 0 : Inactive
thermal 1 : Active (for 4-pole standard motor)
overload relay 2 : Active (for 4-pole inverter motor)
A07 for motor 2 (Level) A07 OL LEVEL2 Approx. 20 to 135% of the inverter rated current, in
Ampere
A08 (Thermal time constant) A08 TIME CNST2 0.5 to 75.0 min
A09 Torque vector control 2 A09 TRQVECTOR2 0 : Inactive
1 : A ctive
A10
Number of motor-2 poles
A10 M2 POLES 2 to 14
A11 Motor 2 (Capacity) A11 M2-CAP 30HP or smaller : 0.01 to 45.00 kW
40HP or larger : 0.01 to 500.00 kW
A12 (Rated current) A12 M2-Ir 0.00 to 2000 A
A13 (Tuning) A13 M2 TUN1 0 : Inactive
1 : Active (One time tuning of %R1 and %X (on
motor stopping mode ))
2 : Active (One time tuning of %R1, %X and Io (on
motor running mode ))
A14 (On-line Tuning) A14 M2 TUN2 0 : Inactive
1 : Active (Real time tuning of %R1 and %X)
A15 (No-load current) A15 M2-Io 0.00 to 2000 A
A16 (%R1 setting) A16 M2-%R1 0.00 to 50.00 %
A17 (%X setting) A17 M2-%X 0.00 to 50.00 %
A18
(Slip compensation control 2)
A18 SLIP COMP2 0.00 to +15.00 Hz
R1+Cable R
V/( 3 x I)
%R1= x 100
XM
X2+XM
X1+X2 x +Cable X
V/ ( 3 x I)
%X= x 100
Alternative Motor Parameters
Chapter01J(P6˜18).p65
07.8.9, 11:53 Page 17
Adobe PageMaker 6.5J/PPC