FujiFilm FDR ES DR-ID1270, Руководство по эксплуатации

Страница: 58 / 76

A-2
Appendix
A Specifications
DR-ID1270 Operation Manual 897N120821E
■ Battery charger (optional)
(1) Operating Conditions
Temperature : 0°C - 35°C
Humidity : 10%RH - 85%RH (no dew condensation)
(2) Non-operating Conditions
(Environmental conditions under which power can be supplied)
Temperature : -20°C - 60°C
Humidity : 10%RH - 95%RH (no dew condensation)
CAUTIONS
Charge the battery pack in the operating environment.
A.1.4 Image Performance
Each flat panel sensor complies with IEC 62220-1 (MEDICAL ELECTRICAL EQUIPMENT -
CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - ) as a general X-ray radiography
equipment.
To ensure optimal image quality, it is recommended that you do not use the flat panel sensor near
devices (motor, transformer, switching supply, etc.) that generate electromagnetic noise.
A.1.5 Load Restriction
Entire surface load :
DR-ID1271SE, DR-ID1272SE, DR-ID1273SE, DR-ID1274SE, DR-ID1275SE :
300kg (661.5 lb)
Local load :
DR-ID1271SE, DR-ID1272SE, DR-ID1273SE, DR-ID1274SE, DR-ID1275SE :
120kg (264.6 lb) / ø40mm (1.6in.) (Based on FUJIFILM measurement specifications)
CAUTIONS
Do not apply an excessive force to the exposure plane.
The sensor inside the flat panel sensor may be damaged, and it may not be possible to make
an exposure properly.
A.1.6 Radio Waves
Wireless specifications for the flat panel sensor are as follows.
Flat panel sensor
Wireless specification IEEE802.11n
Transmit frequency 5.2, 5.3, 5.6, 5.8, 2.4 GHz
Modulation OFDM
Frequency tolerance ±20 ppm
Data transfer rate 35 Mbps
Transfer power 17 dBm or less
CAUTIONS
● Transmit frequencies available vary, depending on the country.
● Radio waves available outdoors vary, depending on the country where the system is used.
● When the DR-ID1270 and any other wireless equipment are operating on the same frequency
channel in a hospital, it may take time to show an image on the image processing unit
monitor.