FujiFilm FDR ES DR-ID1270, Руководство по эксплуатации

Страница: 53 / 76

3-11
Basic Operation
3
DR-ID1270 Operation Manual 897N120821E
3.3 Sleep mode
When sleep mode is enabled, if no operation is performed for about two minutes without an exposure menu
registered, the flat panel sensor will enter sleep mode and the power state is changed to the power-saving state.
Once an exposure menu is registered, sleep mode is canceled automatically. In addition, when the SE cable is
connected to the flat panel sensor or power box, sleep mode is canceled automatically.
In sleep mode, the operating time of the battery pack becomes longer since the power is saved. If the flat panel
sensor is being calibrated, or if it detects an impact, it may take longer time to enter sleep mode, or sleep mode
may be canceled temporarily. When the setting of sleep mode needs to be changed, consult our official dealer or
local representative.