FujiFilm FDR ES DR-ID1270, Руководство по эксплуатации

Страница: 8 / 76

1-2
For Safe Operation
1
DR-ID1270 Operation Manual 897N120821E
WARNING
Do not disassemble or remodel the equipment. Otherwise, fire or electric shock may result.
Keep away from the parts inside the product, which may cause electric shock. If you touch
them accidentally, death or severe injury may result.
WARNING
Do not hit or drop the equipment or subject it to severe shock. Otherwise, the equipment may
be damaged. If the damaged equipment is used, fire or electric shock may result.
In addition, do not apply strong pressure onto the flat panel sensor.
If applied, the flat panel sensor deforms and the waterproof function may be compromised.
WARNING/AVERTISSEMENT
Do not use the flat panel sensor without the battery packs. If the battery packs are not
attached, an electric shock may result.
N’utilisez pas le détecteur à panneau plat sans les batteries. Si les batteries ne sont pas
connectées, un choc électrique risque de se produire.
WARNING
Make sure to use the optional parts recommended by us. Failure to use the optional parts
recommended by us may result in damage to the equipment and/or electric shock and injury.
CAUTIONS
As the cables of the equipment are long, be careful not to entangle the cables during use.
Also, be careful not to trip over the cables. Falls could result in injury.
CAUTIONS
Do not store magnetic media near the DR system and control cabinet. Otherwise, magnetism
generated by the equipment may cause the data to be lost.
CAUTIONS
Keep the equipment away from patient’s body fluids, chemicals, water, etc.
Otherwise, it may become damaged, causing fire or electric shock.
If necessary, protect the flat panel sensor by covering it with a disposable bag.
Explosion Warnings
WARNING
Because this equipment is not explosion-proof, do not use combustible and explosive gases
near the equipment.
WARNING
Flammable gasses may stay in the room after disinfection. If you turn the system on just after
disinfection, ensure that the room is well ventilated before powering on the system.