Fuji Xerox DocuPrint CM215 b, Руководство пользователя

Страница: 263 / 418

Faxing (DocuPrint CM215 f/CM215 fw Only) 263
To print received documents:
1
Press the Job Status button.
2
Select
Secure Receive
, and then press the button.
3
Enter the password, and then press the button.
The faxes stored in memory are printed.
To turn the secure receiving mode off:
1
Access the
Secure Receive Set
menu by following steps 1 to 6 mentioned above in " To turn
the secure receiving mode on: ".
2
Select
Disable
, and then press the button.
3
To return to the previous screen, press the ( Back ) button.

Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the rear of your printer as shown
above.
• Set your printer to
ANS/FAX Mode
and set
Auto Ans. Ans/FAX
to specify the time for the
TAD to respond.
• When the TAD picks up the call, the printer monitors and takes the line if fax tones are received
and then starts receiving the fax.
• If the answering device is off, the printer automatically goes into the fax receive mode after the
ring tone sounds for a predefined time.
• If you answer the call and hear fax tones, the printer will answer the fax call if you
– Set
OnHook
to
On
(you can hear voice or fax tones from the remote machine), and then
press the ( Start ) button, select
Manual Receive
and press the button, and then
hang up the receiver.
OR
– Press the two-digit remote receive code and hang up the receiver.
To the
wall jack
Printer
Line
Telephone Answering Device
Phone