Fuji Xerox DocuPrint CM215 b, Руководство пользователя

Страница: 255 / 418

Faxing (DocuPrint CM215 f/CM215 fw Only) 255
 Receiving a Fax Manually in the TEL Mode
To receive a fax manually, pick up the handset of the external telephone, and follow the instructions
below.
1
Press the Fax button when you hear fax tones on the external telephone.
OffHook
appears.
2
Press the ( Start ) button.
3
Select
Manual Receive
, and then press the button.
The printer receives the document.
 Receiving a Fax Automatically in the TEL/FAX Mode or
ANS/FAX Mode
To use
TEL/FAX Mode
or
ANS/FAX Mode
, you must attach an external telephone to the phone
connector ( ) on the rear of your printer.
In the
TEL/FAX Mode
, if the printer receives an incoming fax, the external telephone rings for the time
specified in
Auto Ans. TEL/FAX
, and then the printer automatically receives a fax.
In the
ANS/FAX Mode
, if the caller leaves a message, the answering machine stores the message as
it would normally. If your printer hears a fax tone on the line, it automatically starts to receive a fax.
NOTE:
• If you have set
Auto Answer Fax
and your answering machine is turned off, or no answering machine is
connected to your printer, your printer will automatically go into the fax receive mode after a predefined time.
See also:
• "Using an Answering Machine" on page 263
 Receiving a Fax Manually Using an External Telephone
This feature works best when you are using an external telephone connected to the phone connector
(
) on the rear of your printer. You can receive a fax from someone you are talking to on the external
telephone without having to go to the printer.
When you receive a call on the external telephone and hear fax tones, press the two-digit keys on the
external telephone.
The printer receives the document.
Press the buttons slowly in sequence. If you still hear the fax tone from the remote machine, try
pressing the two-digit keys once again.
Remote Receive
is set to
Off
at the factory. You can change the two-digit number to whatever you
choose. For details on changing the code, see "Remote Rcv Tone" on page 285 .
NOTE:
• Set the dialing system of your external telephone to DTMF.