Fuji Xerox ApeosPort-V C5580, Руководство администратора

Страница: 744 / 797

16 Appendix
744
A
ppe
n
d
ix
16

After registering a program, you may not be able to retrieve the stored program correctly
if you execute the following operations:
- If a Watermark is registered on the program, and you change the default value of the
Watermark after registering the program
- If a passcode of a folder that is subject to operation by a stored program is changed
after the program is registered
- If the settings of the control panel are changed
- If the features registered on the custom buttons are changed
- If the setting is changed with [Tools] > [System Settings] > [Copy Service Settings] >
[Preset Buttons]
- If the program is selected from a list of a job flow or the Address Book
- If a button no longer functions as a result of a change of optional components such as
Finisher
- If the measurement unit such as mm or inch is changed
- If a file is selected from a file list with Job Status
- The use of a scrolling bar when you select an item

Output Color
When you select [Auto Detect] in [Output Color] for a copy job or select [Color] in [Output
Color] for a print job, the machine may consume yellow, magenta, and cyan toner cartridges
and drum cartridges even when your document is black and white.
In addition, when [Background Suppression (Color Copy)] is set to [High Speed] under
[Tools] > [System Settings] > [Common Service Settings] > [Image Quality Adjustment],
yellow, magenta, and cyan toner cartridges and drum cartridges are always used. Thus these
color toner cartridges and drum cartridges are consumed even when your document is black
and white.

Opening and Closing of the Document Cover during the Power Saver Mode
If you open the document cover during the Power Saver mode, and then start scanning a
document immediately after the machine exits the mode, the detection error of a document
size may occur. In this case, enter the document size manually. It takes a few seconds before
the machine can detect a document size automatically. This detection error will not occur if
you load a document, close the document cover, and wait for a few seconds before start
scanning a document.

Large Size UI Kit (optional)
 By factory default, the date and time are displayed on the lower side of the touch screen
of the Large Size UI Kit. If you want to hide this date and time, contact our Customer
Support Center.
 The display format for the date and time can be changed in the System Administration
mode.
 The time is displayed by minutes and may differ from the actual time by seconds.
 On the [Job Status] screen, jobs listed in [Active Jobs] or [Completed Jobs] fill the entire
screen. Therefore, the date and time are not displayed on the [Job Status] screen.

Operations during the Power Saver mode
 It takes a few seconds before you can operate the system settings under [Tools] after the
machine exits the Sleep mode.
 The <Power Saver> button still lights up when you perform the operations which do not
light up the touch screen such as printing command from a computer.
 A message does not appear on the touch screen if you open and close the top cover of the
document feeder when the document feeder is deactivated (such as when the service to