manualshive.com logo in svg

Fuji Xerox ApeosPort-V C5580, Руководство администратора

Продукт Fuji Xerox ApeosPort-V C5580 - многофункциональное устройство для печати, копирования и сканирования. Администраторская инструкция доступна для бесплатного скачивания на нашем сайте. Узнайте все возможности и настройки этого устройства, скачав руководство по эксплуатации прямо сейчас с manualshive.com.

Поделиться
Скачать
background image

16 Appendix

742

A

ppe

n

d

ix

16

Restrictions on Method of Recipient Specification

The [New Recipients] and [Redial List] buttons may not be displayed when you specify a 
recipient for fax/Internet fax/e-mail transmission if the method of recipient specification 
is restricted in the System Administration mode. In this case, you cannot use the numeric 
keypad either. Consequently, the recipients you can specify are limited to those who are 
registered on the Address Book.

You must add an address book entry using CentreWare Internet Services, or Device Setup 
Tool (free software). The system administrator, however, can register new recipients from 
the control panel of the machine even when the method of recipient specification is 
limited.

The users who belong to an authorization group for which [Restrict Recipient Selection 
Method] is set to [No Restriction] can directly specify a recipient for fax/Internet fax or an 
e-mail transmission.

One Touch Buttons

The one touch buttons (only for fax models) are used to specify an address when sending 
faxes, IP faxes, internet faxes, Scan to PC, or E-mail. The buttons cannot be used when you 
specify an e-mail address, a shared folder of SMB/FTP, or a server address.

The following two methods are available to assign the address numbers to the one touch 
buttons.

Note

•

[Type 1] is selected by factory default.

•

One touch buttons cannot be attached with the Embedded IC Card Reader (optional).

For more information on how to change the number of address numbers assigned, refer to "One-touch Buttons" (P.151).

Assigning to the One Touch Buttons

You can change the way how address numbers and stored programs are assigned to the one 
touch buttons. When you have changed the assignment, some one touch buttons that were 
used for address numbers before may be used for stored programs while other one touch 
buttons that were used for stored programs before may be used for address numbers. Be 
sure that you perform the correct operation.

USB Interface Connector of the Machine

To use the USB memory slot on the control panel, the USB Memory Kit (optional) is 
required.

Insert a USB memory device directly into the USB memory slot on the control panel. If you 
connect a USB memory device via a USB cable, the operation is not guaranteed.

To connect a USB memory device via a USB cable, use the USB Hub (optional).

When the USB Hub (optional) is installed, up to two devices can be connected 
simultaneously even though three USB interface connectors of the machine are available 
including the USB memory slot (one slot) on the control panel and USB Hub (two slots) on 
the left rear side of the machine.

The IC Card Reader and USB memory cannot be connected to the machine 
simultaneously. When connected simultaneously, only the first device will be recognized.

IC Card Reader

There are two types of IC Card Reader you can choose: the Embedded IC Card Reader 
(optional) and the IC Card Reader for the Wing Table (optional).

[Type 1]:  Assigns the one touch buttons 1 to 70 to the address numbers 0001 to 0070, 

and buttons M01 and M02 to the stored programming jobs 1 and 2.

[Type 2]:

 Assigns the one touch buttons 1 to 60 to the address numbers 0001 to 0060, 
and buttons 61 to 70, M01 and M02 to the stored programming jobs 1 and 12.

Содержание ApeosPort-V C5580






























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ApeosPort-V C5580

Oki MPS4200mb Safety Information Manual preview
MPS4200mb
Бренд: Oki Страницы: 40
Oki ML620 Manual De L'Utilisateur preview
ML620
Бренд: Oki Страницы: 104
Oki OKIOFFICE84 Garantie, Réglementation Et Spécifications preview
OKIOFFICE84
Бренд: Oki Страницы: 28
Oki OKIOFFICE84 Garantia, Informações Normativas E Especificações preview
OKIOFFICE84
Бренд: Oki Страницы: 23
Oki ML620 Guía Del Usuario preview
ML620
Бренд: Oki Страницы: 108
Oki ML620 Specifications preview
ML620
Бренд: Oki Страницы: 2
Oki ML490 Series Manual Do Usuário preview
ML490 Series
Бренд: Oki Страницы: 94
Oki ML490 Series Maintenance Manual preview
ML490 Series
Бренд: Oki Страницы: 135
Oki ML420 Series Manual Do Usuário preview
ML420 Series
Бренд: Oki Страницы: 97
Oki PRO330S User Manual preview
PRO330S
Бренд: Oki Страницы: 280
Oki ML320 Turbo Guía Del Usuario preview
ML320 Turbo
Бренд: Oki Страницы: 123
Oki Pacemark PM4410 Manual De L'Utilisateur preview
Pacemark PM4410
Бренд: Oki Страницы: 144
Oki Pacemark PM4410 Safety & Warranty preview
Pacemark PM4410
Бренд: Oki Страницы: 28
Oki MPS480mb User Manual preview
MPS480mb
Бренд: Oki Страницы: 176
Wang 2241 Reference Manual preview
2241
Бренд: Wang Страницы: 24
Xerox Phaser 6250DP Setup Manual preview
Phaser 6250DP
Бренд: Xerox Страницы: 2
Xerox Phaser 6280N Evaluator Manual preview
Phaser 6280N
Бренд: Xerox Страницы: 16
Canon GP160DF Service Manual preview
GP160DF
Бренд: Canon Страницы: 797

Бренды по названию

Популярные бренды

Загрузить еще бренды