Fuji Xerox ApeosPort-V 6080, Руководство администратора

Страница: 465 / 745

Error Code
465
Pro
b
lem
So
lv
in
g
15
016-598
016-599 [Cause] The size of an e-mail page exceeds the maximum message size because of page
splitting.
[Remedy] Take one of the following measures:
z
Reduce the file size for [Quality/File Size].
z
Increase the value for [Maximum Split Count].
For more information on [Quality/File Size], refer to "5 Scan" > "E-mail Options/Filing Options" > "Quality/File Size
(Specifying an Image Compression Ratio When Scanning)" in the User Guide.
For more information on [Maximum Split Count], refer to "Maximum Split Count" (P.238).
016-700 [Cause] The job was suspended because the number of the digits for the Secure Print or Charge
Print passcode set on the print driver was less than the value specified in [Minimum
Passcode Length for Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or longer than the value specified in
[Minimum Passcode Length for Stored Job].
016-701
[Cause] Unable to process print data because of insufficient memory.
[Remedy] Stop unnecessary ports or delete unnecessary data to increase memory.
016-702 [Cause] Unable to process print data because of insufficient print page buffer.
[Remedy] Take one of the following measures:
z
Set [Image Quality] to [Standard].
z
Increase the print page buffer size.
For more information on the [Image Quality], refer to the help of the print driver. For more information about memory,
refer to "Allocate Memory" (P.206).
016-703 [Cause] The machine received an e-mail specified with an invalid folder number.
[Remedy] For errors occurring during fax or Internet fax transmission:
Contact our Customer Support Center.
For errors occurring during e-mail/fax/Internet fax reception:
Take one of the following measures:
z
Register the specified folder number, and request the sender to send the e-mail/fax/
Internet fax again.
z
Request the sender to send to an available folder.
If the error still is not resolved, contact our Customer Support Center.
016-704
[Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
Refer to "6 Send from Folder" > "Checking/Operating Files in a Folder" in the User Guide.
016-705 [Cause] Probable causes are as follows:
1)You have specified the machine for the folder registry for the scanned document.
However, the Scanner Kit (optional) is not installed.
2)You have not used the print driver for the machine.
[Remedy] For 1), press the <Services Home> button, and check whether [Scan to PC] is displayed.
If [Scan to PC] is displayed, then check whether the scanned document can be stored in
a folder. If unable to store it in the folder, install the Scanner Kit (optional).
For 2), use the print driver appropriate for the machine.
If the error still is not resolved, contact our Customer Support Center.
Error Code Cause and Remedy