Fuji Electric LONWORKS OPC-LNW, Инструкция по эксплуатации

Страница: 63 / 84

21
ENGLISH
*
2
This LONWORKS interface card needs approx. 0.5 second for initialization. Therefore, specifying less
than 0.5 second cannot start data transmission from the output NV until approx. 0.5 second elapses.
When the interface card is powered up, it transmits all output NVs to validate the latest inverter settings
on the LONWORKS network.
Immediately after commissioning, the LONWORKS integration tool temporarily monitors CP default
values, so those CP values do not necessarily match the inverter's function code settings. This is,
however, only apparent and the inverter runs with its function code settings.
To make the monitored CP values match the inverter's settings, use the LONWORKS integration tool
to execute the "Synchronize CP" command (e.g., ReSync CPs in LonMaker) and upload the CP
values of this card.
Modifying CP-associated function codes from the keypad does not automatically update the CP values
being monitored by the LONWORKS integration tool. This is, however, only apparent and the
modification is validated on the associated CPs without any problems.
To update the monitored CP values, use the LONWORKS integration tool to execute the "Synchronize
CP" command (e.g., ReSync CPs in LonMaker) and upload the CP values of this card.
The moment the LONWORKS integration tool sets CP values (new or unchanged values), all output
NVs implemented on this card output the latest data at that time. Use this feature to update the NVs
on the network with the latest data.
In addition, switching the inverter from offline to online also outputs all output NVs as well.