Fuji Electric LONWORKS OPC-LNW, Инструкция по эксплуатации

Страница: 59 / 84

17
ENGLISH
Index Variable name Variable type Descriptions
Function
code Refer to:
nv35 nvoAIval_1 SNVT_lev_percent This output reports the input voltage at terminal
[12].
(100% at 10 V, 0% at 0 V)
M49 p. 27
nv36 nvoAIval_2 SNVT_lev_percent This output reports the input current at terminal
[C1].
(100% at 20 mA, 0% at 4 mA or 0 mA)
M50 p. 27
nv37 nvoAIval_3 SNVT_lev_percent This output reports the input voltage at terminal
[V2].
(100% at 10 V, 0% at 0 V)
M54 p. 27
nv38 nvoPIDFb SNVT_lev_percent This output reports the PID feedback value
(%).
M72 p. 28
nv39 nvoYstatus_1 SNVT_switch This output reports the status of digital output
terminal [Y1] whose function is assigned by
E20. M15 p. 28
nv40 nvoYstatus_2 SNVT_switch This output reports the status of digital output
terminal [Y2] whose function is assigned by
E21. M15 p. 28
nv41 nvoYstatus_3 SNVT_switch
This output reports the status of digital output
terminal [Y3] whose function is assigned by
E22.
M15 p. 28
nv42 nvoYstatus_4 SNVT_switch Reserved. - -
nv43 nvoYstatus_5 SNVT_switch This output reports the status of digital output
terminal [Y5A/C] whose function is specified by
E24. M15 p. 28
nv44 nvoXstatus_1 SNVT_switch This output reports the status of a terminal
command assigned to digital input terminal
[X1].
When E01 data is "25" (Universal DI), this
output reports the ON/OFF state of the
physical terminal [X1]. M13 p. 28
nv45 nvoXstatus_2 SNVT_switch This output reports the status of a terminal
command assigned to digital input terminal
[X2].
When E02 data is "25" (Universal DI), this
output reports the ON/OFF state of the
physical terminal [X2]. M13 p. 28
nv46 nvoXstatus_3 SNVT_switch This output reports the status of a terminal
command assigned to digital input terminal
[X3].
When E03 data is "25" (Universal DI), this
output reports the ON/OFF state of the
physical terminal [X3]. M13 p. 28
nv47 nvoXstatus_4 SNVT_switch This output reports the status of a terminal
command assigned to digital input terminal
[X4].
When E04 data is "25" (Universal DI), this
output reports the ON/OFF state of the
physical terminal [X4]. M13 p. 28
nv48 nvoXstatus_5 SNVT_switch This output reports the status of a terminal
command assigned to digital input terminal
[X5].
When E05 data is "25" (Universal DI), this
output reports the ON/OFF state of the
physical terminal [X5]. M13 p. 28
nv49 nvoInAlarm SNVT_switch This output remains ON when the inverter is in
an alarm state or has not canceled the recent
alarm. M14 -
nv50 nvoAlarm UNVT_alarm_cod
(1 byte decimal) This output reports the code of an alarm that is
occurring or has occurred most recently. M16 p. 29