Fuji Electric LONWORKS OPC-LNW, Инструкция по эксплуатации

Страница: 53 / 84

11
ENGLISH
To enable other functions, modify function codes listed in Table 6-3.
Table 6-3 Function Codes Required for Enabling Other Functions
Function
code
Description
Factory
default
Setting range Remarks
o27*
1
Operation selection at occurrence of
LONWORKS communications error 0 0 to 15 Can be specified by
UCPT_CblLossMode.
o28*
1
Timer at occurrence of LONWORKS
communications error 0.0 s 0.0s to 60.0 s Can be specified by
UCPT_CblLossTimer.
o30 Service button equivalent 0 0 to 255 Setting o30 to "1" or above is
functionally equivalent to the
depression of the service
button.
Once o30 data is changed, it
will automatically revert to "0."
W90 LONWORKS card software version Depends
on cards --
(Only for monitor) 4-digit in decimal notation.
(Ex.) Ver. 1.42 is shown as
0142.
W95 Count of communications errors
between card and inverter 0 --
(Only for monitor)
W96 Contents of communications errors
between card and inverter
(Transmission errors only *
2
)
0 --
(Only for monitor)
Contents of the most recent
communications error.
The error codes are identical
with the ones used in the Fuji
general-purpose inverter
protocol.
*
3
*
1
For details about o27 and o28, refer to Chapter 8, Section 8.1 "Specifying an Inverter Reaction to LONWORKS
Communications Errors."
*
2
Application errors except transmission errors will be written into the VSD object, nv34 nvoAccessErrCode. For details
about error code contents, refer to Chapter 7, Section 7.6.2 "Writing to inverter's function codes."
*
3
For error code details, refer to the RS-485 Communication User's Manual (MEH448), Chapter 4, Section 4.3
"Communications Errors."