M6500 Series NE Configuration Manual
159
Figure9-39 24-Hour OTUk/ODUk Monitoring Data
9.2.4.3. Error Generation Conditions for Monitoring Parameters
SES counts are generated when the following alarms are generated at the near end, and continuous 10S of SES
becomes a UAS. If the alarm persists, the ES and SES stops counting, but the UAS counts all the time, as shown
in the figure.
Equipment Missing
Equipment Mismatch
Equipment Failure
OTUk defects: OTU-LOS, OTU-LOF, OTU-LOM, OTU-AIS and OTU-TIM.
ODUk defects: alarms of the Server layer (e.g. LOS, LOF, LOM), ODU-AIS, ODU-LCK, ODU-TIM, ODU-OCI
and ODU-PLM.
When alarms are generated at the far end, SES counts generate.
BDI.
When low-rate bit error is inserted by the meter, BBE and ES generate.
ES and SES are generated when high-rate bit error is inserted by the meter. The continuous 10S of SES
will become a UAS. If the high-rate bit error of the meter keeps, then ES and SES stops counting but
UAS will count all the time.
Figure9-40 UAS Always Counts
9.2.4.4. OTUk/ODUk Monitoring Data Reset
When the current OTUk/ODUk monitoring data needs to be reset and to restart the monitoring, the 15-minute
and 24-hour operation steps are the same. Taking 15-minute operation as an example, you can click on Reset
behind each piece of monitoring record to perform resetting of a single piece of monitoring record, or you can
select the first box to do batch resetting, as shown in the figure below.
Figure9-41 OTUk/ODUk Reset
Then click on
Apply
button, as shown in the figure, it will show that the operation is successful. After that, click
on
Refresh
button to refresh the whole page. At this time, the suspicious interval marker will become from
Содержание M6500 Series
