FS M6500 Series, Руководство по настройке

Страница: 10 / 185

M6500 Series NE Configuration Manual
9
1. Preparation Before Configuration
1.1. Configuration Process
When configuring M6500 devices on M Series NMS system, some rules and orders must be followed.
If the whole project and its configuration are initially created, please refer to process in 1-1 to complete the
operation. If the project has been created, only the configuration of one NE or single card needs to be changed,
please perform the operation according to relevant content of chapters in Figure 1-1.
Figure 1-1 M6500 Service Configuration Process
M Series NMS system mainly contains operations such as parameter configuration of single card service,
protection, in-band management as well as alarm query and performance query etc.
It is recommended that the configurations of M Series NMS equipment be completed according to the sequence of
operation in the flowchart.
1.2. Connect NMS System & NE
For different network devices, there are multiple connection ways to connect M Series NMS network
management computer and
M6500 network elements. Normally the M Series NMS Server and M6500 n etwork
Element are both connected to a HUB by direct connection network cable. But the M Series NMS Server can also