FS M6500 Series, Руководство по настройке

Страница: 151 / 185

M6500 Series NE Configuration Manual
150
Figure9-14 15-Minute Monitoring Point Data of Optical Power
When the 24-hour monitoring port is enabled, the suspicious interval marker should be untrustworthy. The
running time counts from 0. After 86400 seconds, the suspicious interval marker will become trustworthy. The
running time counts again from 0. The last 24-hour data automatically becomes the history data.
Figure9-15 24-Hour Monitoring Point Data of Optical Power
9.2.1.3. Reset Optical Power Monitoring Data
When the current optical power monitoring point needs to be reset and to restart the monitoring, the
15-minute and 24-hour operation steps are the same. Taking 15-minute operation as an example, you can click
on Reset behind each piece of monitoring record to perform resetting of a single piece of monitoring record, or
you can select the first box to do batch resetting, as shown in the figure below.
Figure9-16 Batch Resetting of Optical Power
Then click on Apply button, as shown in the figure, it will show that the operation is successful. After that, click
on " Refresh " button to refresh the whole page. At this time, the suspicious interval marker will become from
untrustworthy to trustworthy and the running time counts again from 0. The maximum optical power time
stamp and the minimum optical power time stamp are updated to the latest time to read the optical power,
and the value of the maximum and minimum optical power are updated to the data read at the latest time.
Figure9-17 Successful Reset Operation