FS M6500 Series, Руководство по настройке

Страница: 150 / 185

M6500 Series NE Configuration Manual
149
Figure9-12 Current Performance Statistics Directory
9.2.1. Monitoring of Optical Power
9.2.1.1. Introduction of Optical Power Monitoring Parameters
The monitoring parameters of optical power monitoring point include maximum optical power, maximum
optical power time stamp, minimum optical power, minimum optical power time stamp, average optical power,
suspicious interval marker, running time and reset operation. The performance parameters of optical power will
be enabled or disabled at the same time.
Figure9-13 Display Monitoring Parameters
9.2.1.2. View Optical Power Monitoring Information
Select the appropriate network elements, slots, ports and monitoring cycle through the selection box above the
menu, the optical power value of a certain network element/slot/port will be displayed. Optical power includes
two monitoring points for near-end transmission and near-end reception. Optical module is inserted into the
monitoring port. Data of the maximum and minimum optical power and of the corresponding generation time
stamp which are currently read will be displayed. After the 15-minute monitoring port is enabled, the suspicious
interval marker should be untrustworthy. The running time counts from 0. After 900 seconds, the suspicious
interval marker will become trustworthy and the running time counts again from 0. The last 15-minute data
automatically becomes the history data.